RM3660EC
_59
Vehicle Exterior
_080735
DOOR / HATCH
_0392080
HOOD
G
DOOR / HATCH HOOD ON-VEHICLE INSPECTION
PROCEDURE
53301
1.INSPECT HOOD SUB-ASSEMBLY (for TFTM Made)
a.
Check that the clearance measurements of areas a through d are within each standard range.
2.583,1.063 2.74,1.26
0.156,0.198
10
false
a
5.25,0.75 5.406,0.948
0.156,0.198
10
false
b
5.552,1.448 5.708,1.646
0.156,0.198
10
false
c
0.656,3.875 0.813,4.073
0.156,0.198
10
false
d
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| a | 8.65 to 12.65 mm (0.341 to 0.498 in.) | b | 3.7 to 6.7 mm (0.146 to 0.264 in.) |
| c | 0.2 to 3.2 mm (0.00787 to 0.126 in.) | d | 7.25 to 11.25 mm (0.285 to 0.443 in.) |
53301
2.INSPECT HOOD SUB-ASSEMBLY (for GTMC Made)
a.
Check that the clearance measurements of areas a through e are within each standard range.
2.802,0.396 2.958,0.594
0.156,0.198
10
false
a
2.646,1.073 2.802,1.271
0.156,0.198
10
false
b
5.198,0.875 5.354,1.073
0.156,0.198
10
false
c
5.281,1.646 5.438,1.844
0.156,0.198
10
false
d
0.698,3.885 0.854,4.083
0.156,0.198
10
false
e
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| a | 1.85 to 5.85 mm (0.0728 to 0.2303 in.) | b | -1.85 to 2.15 mm (-0.0728 to 0.0846 in.) |
| c | 3.7 to 6.7 mm (0.146 to 0.264 in.) | d | -0.7 to 2.3 mm (-0.0276 to 0.09055 in.) |
| e | 6.35 to 10.35 mm (0.250 to 0.4075 in.) | - | - |