RM3660EC _51 Engine / Hybrid System _080773 HYBRID / BATTERY CONTROL _0600291 PA10 HYBRID CONTROL SYSTEM(for LITHIUM-ION BATTERY) D

HYBRID / BATTERY CONTROL PA10 HYBRID CONTROL SYSTEM(for LITHIUM-ION BATTERY) DTC CHECK / CLEAR

CLEAR PERMANENT DTC

OUTLINE

After clearing current DTCs using the GTS (or by disconnecting the cable from the negative (-) auxiliary battery terminal), permanent DTCs can be cleared when the universal trip is performed and then the system is determined to be normal for the relevant DTCs. The driving pattern to obtain a normal judgment is described under the "Confirmation Driving Pattern" for the respective DTC.

To clear permanent DTCs, all of the following conditions must be are met:

There is a history that universal trip driving was performed.

The vehicle has been judged as normal for 1 trips.

No malfunctions are detected.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

Powertrain > Hybrid Control > Trouble Codes: 50001 397

HINT:: If "YES" is displayed for the value of "PERMANENT" at the top right of the GTS screen, permanent DTCs are stored.

Select the "Generic" tab.

Check if permanent DTCs are stored.

HINT:: If permanent DTCs are not output, it is not necessary to continue this procedure.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

Powertrain > Hybrid Control > Clear DTCs: 50002 397

NOTICE:: Do not clear the DTCs or disconnect the cable from the auxiliary battery terminal after performing this step.

Perform the universal trip.

CAUTION:: When performing the driving pattern, obey all speed limits and traffic laws.

HINT:: The universal trip driving pattern and normal judgment procedure can be performed consecutively in the same driving cycle.

2.76,2.573 2.781,1.219 true 5.521,1.688 5.917,1.198 true 5.865,3.177 5.104,2.698 true 5.854,3.177 5.979,2.719 true 3.688,3.208 3.229,2.708 true 0.063,0.052 1.563,0.26 1.5,0.208 10 false Clear Permanent DTC 1.5,0.344 1.896,0.583 0.396,0.24 10 false Trip 3.313,0.344 5.292,0.615 1.979,0.271 10 false Universal Trip Driving Pattern 2.01,0.927 3.573,1.229 1.563,0.302 10 false Problem areas repaired 5.063,0.896 6.948,1.146 1.885,0.25 10 false Normal Judgment Procedure 5.156,3.24 6.719,3.563 1.563,0.323 10 true Permanent DTCs Check 3.302,3.229 4.438,3.542 1.135,0.313 10 true DTCs are cleared 1.26,1.625 1.75,1.917 0.49,0.292 10 false Driving 0.552,2.094 1.917,2.458 1.365,0.365 10 false Ignition Switch ON 0.625,2.604 1.813,2.948 1.188,0.344 10 false Ignition Switch off 0.427,3.74 1.979,4.104 1.552,0.365 10 false Confirmed DTC status 0.375,4.458 1.927,4.823 1.552,0.365 10 false Permanent DTC status 2.396,3.729 2.885,4.021 0.49,0.292 10 false ON 2.396,4.49 2.885,4.781 0.49,0.292 10 false ON 3.177,4 3.667,4.292 0.49,0.292 10 false OFF 5.927,4.75 6.417,5.042 0.49,0.292 10 false OFF 1.438,5.146 3,5.458 1.563,0.313 10 true : Malfunction Detected 1.438,5.448 3,5.76 1.563,0.313 10 true : Normal Judgment

0.073,0.083 1.927,0.333 1.854,0.25 10 false Universal Trip Driving Pattern 3.354,0.438 5.042,0.708 1.688,0.271 10 false Total of 5 minutes or more 0.563,1.156 2.552,1.5 1.99,0.344 10 false 40 km/h (25 mph) 0.438,2.177 1.594,2.552 1.156,0.375 10 false Ignition Switch ON (READY) 0.427,2.625 3.49,2.823 3.063,0.198 10 false Ignition Switch ON 0.49,2.938 2.021,3.198 1.531,0.26 10 false Ignition Switch off 2.156,2.698 4.104,2.969 1.948,0.271 10 false 30 seconds or more 3.198,3.198 5.021,3.469 1.823,0.271 10 false 10 minutes or more

Turn the ignition switch to ON (READY) and wait for 30 seconds or more.

ii.

Drive the vehicle at 40 km/h (25 mph) or more for a total of 5 minutes or more.

HINT:: It is possible to complete the drive pattern even if the vehicle decelerates to less than 40 km/h (25 mph) during the driving cycle provided that the vehicle is driven at 40 km/h (25 mph) or more for a total of 5 minutes.

iii.

Allow 10 minutes or more to elapse from the time the ignition switch turned to ON (READY).

Turn the ignition switch off and wait for 2 minutes or more.

Turn the ignition switch to ON.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

Powertrain > Hybrid Control > Trouble Codes: 50001 397

Check that the permanent DTCs have been cleared.

HINT:: If permanent DTCs are not output, it is not necessary to continue this procedure.

Perform the normal judgment procedure in the respective confirmation driving pattern of each output DTC.

HINT:: Do not turn the ignition switch off by mistake during this step.

With the ignition switch ON (READY) and wait for 5 seconds or more.

Turn the ignition switch off and wait for 2 minutes or more.

Turn the ignition switch to ON.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

Powertrain > Hybrid Control > Trouble Codes: 50001 397

Check that the permanent DTCs have been cleared.