SUPPLEMENTAL RESTRAINT SYSTEMS REAR AIRBAG SENSOR ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
- CAUTION:
-
-
Be sure to correctly follow the removal and installation procedures for the side No. 2 airbag sensors.
PROCEDURE
89831B
1.INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
for NR Series Engine: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for NR Series Engine)>DTC CHECK / CLEAR202307,999999,_58,_080741,_0610731,RM100000002CH03,
89831B
2.INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
for NR Series Engine: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for NR Series Engine)>DTC CHECK / CLEAR202307,999999,_58,_080741,_0610731,RM100000002CH03,
Visually check the side No. 2 airbag sensors for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.
- HINT:
-
The defects are as follows:
- ·
Cracks in the sensor housing
·Dents in the sensor housing
·Chips in the sensor housing
·Cracks or other damage to the connector
·Damage to the serial number
- OK:
No defects are found.
If any defects are found, replace the side No. 2 airbag sensor with a new one.
89831B
3.INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag is Deployed)
When airbags have deployed as the result of a collision, be sure to replace all side No. 2 airbag sensors in the damaged areas (anywhere in need of repair).
Visually check the side No. 2 airbag sensors in undamaged areas for defects.
- HINT:
-
The defects are as follows:
- ·
Cracks in the sensor housing
·Dents in the sensor housing
·Chips in the sensor housing
·Cracks or other damage to the connector
·Damage to the serial number
- OK:
No defects are found.
If any defects are found or a side No. 2 airbag sensor has detected a major collision, replace the side No. 2 airbag sensor with a new one.