1. CHECK STEERING EFFORT (TORQUE)
These service operations may affect the SRS airbags. Be sure to read the precautionary notices concerning the SRS airbag system before servicing.
Stop the vehicle on a level, paved surface and align the wheels straight ahead.
Remove the horn button assembly.
Connect the cable to the negative (-) auxiliary battery terminal.
for 8ZR-FXE: Click hereGeneral>MAINTENANCE>8ZR-FXE AUXILIARY BATTERY>INSTALLATION202304,999999,_V1,_080956,_0392376,RM100000002ACL8_01_0029,
for M20F-FXS, M20G-FXS: Click hereGeneral>MAINTENANCE>M20F-FXS, M20G-FXS AUXILIARY BATTERY>INSTALLATION202307,999999,_V1,_080956,_0611807,RM100000002CK9L_01_0015,
Using a torque wrench, check that the steering wheel set bolt is properly tightened.
Start the engine so that the power steering is ready to operate.
Turn the steering wheel 90 degrees to the right and check steering effort (torque) with the steering wheel turned. Check in the opposite direction using the same method.
5.5 N*m (56 kgf*cm, 49 in.*lbf) or less
Align the front wheels facing straight ahead.
Turn the power switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
for 8ZR-FXE: Click hereGeneral>MAINTENANCE>8ZR-FXE AUXILIARY BATTERY>REMOVAL202304,999999,_V1,_080956,_0392376,RM100000002ACL7_01_0028,
for M20F-FXS, M20G-FXS: Click hereGeneral>MAINTENANCE>M20F-FXS, M20G-FXS AUXILIARY BATTERY>REMOVAL202307,999999,_V1,_080956,_0611807,RM100000002CK9K_01_0013,
Install the horn button assembly.