RM3660EC
_V1
General
_080738
SPECIFICATIONS
_0579972
PA10/PB10 HYBRID TRANSMISSION / TRANSAXLE
F
SPECIFICATIONS PA10/PB10 HYBRID TRANSMISSION / TRANSAXLE SERVICE DATA
Hybrid Transaxle System
| Maintenance mode engine idle speed
|
Hybrid transaxle fluid temperature
|
Hybrid transaxle fluid pressure
|
| 900 to 1000 rpm
|
20 to 50°C (68 to 122°F)
|
10 kPa (0.1 kgf/cm2, 1 psi) or more
|
Hybrid Transaxle Fluid
| for PA10
|
| Hybrid transaxle fluid standard capacity (for Reference)
|
Classification
|
| 3.0 liters (3.2 US qts, 2.6 Imp. qts)
|
TOYOTA GENUINE e-Transaxle Fluid TE
|
| for PB10
|
| Hybrid transaxle fluid standard capacity (for Reference)
|
Classification
|
| 3.7 liters (3.9 US qts, 3.3 Imp. qts)
|
TOYOTA GENUINE e-Transaxle Fluid TE
|
Hybrid Transaxle Oil Seal
| Front drive shaft oil seal RH
|
Standard depth
|
-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
|
| Front drive shaft oil seal LH
|
Standard depth
|
-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
|
Input Shaft Oil Seal
| for PA10
|
| Input shaft type T oil seal
|
Standard depth
|
1.0 to 1.8 mm (0.0394 to 0.0709 in.)
|
| for PB10
|
| Input shaft type T oil seal
|
Standard depth
|
3.3 to 4.5 mm (0.130 to 0.177 in.)
|
Shift Lever
| Shift lock control ECU
|
| Inspect wire harness:
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 2 (IG) - Body ground
|
Ignition switch ON
|
11 to 14 V
|
| Ignition switch off
|
Below 1 V
|
| 1 (STP) - Body ground
|
Ignition switch ON, brake pedal depressed
|
11 to 14 V
|
| Ignition switch ON, brake pedal released
|
Below 1 V
|
| 4 (E) - Body ground
|
Always
|
Below 1 Ω
|
| Inspect transmission control switch (for PA10):
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 4 (IG) - 5 (S)
|
Shift lever in B
|
Below 1 Ω
|
| Shift lever not in B
|
10 kΩ or higher
|
| Inspect transmission control switch (for PB10):
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 4 (IG) - 5 (S)
|
Shift lever in M, "+" or "-"
|
Below 1 Ω
|
| Shift lever not in M, "+" or "-"
|
10 kΩ or higher
|
| 3 (SFTU) - 2 (E)
|
Shift lever held in "+"
(Up-shift)
|
Below 1 Ω
|
Shift lever not held in "+"
(Up-shift)
|
10 kΩ or higher
|
| 1 (SFTD) - 2 (E)
|
Shift lever held in "-"
(Down-shift)
|
Below 1 Ω
|
Shift lever not held in "-"
(Down-shift)
|
10 kΩ or higher
|
Shift Lever Position Sensor
| Tester Connection
|
Condition
|
Specified Condition
|
| 7 (+B) - 3 (PR)
|
Shift lever in P
|
Below 1 Ω
|
| 7 (+B) - 4 (PNB)
|
Below 1 Ω
|
| 7 (+B) - 8 (P)
|
Below 1 Ω
|
| 7 (+B) - 1 (DB1), 2 (N), 6 (DB2) or 9 (R)
|
10 kΩ or higher
|
| 7 (+B) - 3 (PR)
|
Shift lever in R
|
Below 1 Ω
|
| 7 (+B) - 9 (R)
|
Below 1 Ω
|
| 7 (+B) - 1 (DB1), 2 (N), 4 (PNB), 6 (DB2) or 8 (P)
|
10 kΩ or higher
|
| 7 (+B) - 2 (N)
|
Shift lever in N
|
Below 1 Ω
|
| 7 (+B) - 4 (PNB)
|
Below 1 Ω
|
| 7 (+B) - 1 (DB1), 3 (PR), 6 (DB2), 8 (P) or 9 (R)
|
10 kΩ or higher
|
| 7 (+B) - 1 (DB1)
|
Shift lever in D
|
Below 1 Ω
|
| 7 (+B) - 6 (DB2)
|
Below 1 Ω
|
| 7 (+B) - 2 (N), 3 (PR), 4 (PNB), 8 (P) or 9 (R)
|
10 kΩ or higher
|
| 7 (+B) - 1 (DB1)
|
Shift lever in B (for PA10)
Shift lever in M (for PB10)
|
Below 1 Ω
|
| 7 (+B) - 4 (PNB)
|
Below 1 Ω
|
| 7 (+B) - 6 (DB2)
|
Below 1 Ω
|
| 7 (+B) - 2 (N), 3 (PR), 8 (P) or 9 (R)
|
10 kΩ or higher
|
Pattern Select Switch
| Combination switch assembly
|
| Inspect the DRIVE MODE switch:
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 6 (DRV) - 5 (E)
|
Pressed
|
Below 50 Ω
|
| Not pressed
|
10 kΩ or higher
|
| Inspect the illumination:
|
| Measurement Condition
|
Specified Condition
|
| Auxiliary battery positive (+) → 4 (ILL+)
|
Illuminates
|
| Auxiliary battery negative (-) → 1 (ILL-)
|