READ DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Communication Power Integration No.1 | Connection status between No. 1 semiconductor power integration ECU and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication Power Integration No.2 | Connection status between No. 2 semiconductor power integration ECU and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication Power Integration No.3 | Connection status between No. 3 semiconductor power integration ECU and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication Power Distribution Box | Connection status between power distribution box assembly and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
When there is a malfunction, a DTC is stored. |
| Communication Wiper Module | Connection status between windshield wiper relay assembly and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
When there is a malfunction, a DTC is stored. |
| Communication D-Door e-Latch | Connection status between front door lock with motor assembly RH and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication P-Door e-Latch | Connection status between front door lock with motor assembly LH and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication RR-Door e-Latch | Connection status between rear door lock with motor assembly LH and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication RL-Door e-Latch | Connection status between rear door lock with motor assembly RH and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication Illumination Module "A" | - | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication Illumination Module "B" | - | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication LDM LH | Connection status between headlight unit assembly LH and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication LDM RH | Connection status between headlight unit assembly RH and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication of Color Illumination Module "A" | - | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication of Color Illumination Module "B" | - | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
| Communication of Color Illumination Module "C" | Connection status between room light control relay and main body ECU (multiplex network body ECU) | OK or STOP | OK: Connection
STOP: No connection |
Not applicable* |
*: Although this item is displayed on the GTS, it is not applicable to this vehicle.