SEAT BELT WARNING SYSTEM DESCRIPTION
Seat belt warning light operation for driver seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.
Seat belt warning light operation for front passenger seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.
Rear seat belt warning light:
The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the vehicle speed and rear seat belt state.
Front seat belt warning buzzer:
After turning the ignition switch to ON, if the driver seat belt is not fastened within 1.8 seconds, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
When the vehicle is driven at approximately 10 km/h (6 mph)*1 or 20 km/h (12 mph)*2 or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.
When 24 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.
Rear seat belt warning buzzer:
When the vehicle is driven at approximately 10 km/h (6 mph)*1 or 20 km/h (12 mph)*2 or more with a rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.
After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 66 seconds.
*1: except vehicles with customize setting "Seatbelt Warning Buzzer Function"
*2: for vehicles with customize setting "Seatbelt Warning Buzzer Function"
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Front seat inner belt assembly (for driver side) | Informs the main body ECU (multiplex network body ECU) of the driver seat belt condition (fastened or unfastened). |
| Front seat inner belt assembly (for front passenger side) | Informs the combination meter assembly of the front passenger seat belt condition (fastened or unfastened). |
| Occupant detection sensor (separate type front seat cushion pad RH)) | Informs the power distribution box assembly of the front passenger seat condition (occupied or unoccupied). |
·
Rear seat inner belt assembly RH ·
Rear seat inner with center belt assembly LH |
Informs the power distribution box assembly of each rear seat belt condition (fastened or unfastened). |
| Rear door courtesy light switch assembly (LH/RH) | Informs the main body ECU (multiplex network body ECU) of the rear door condition (open or closed). |
| Combination meter assembly | ·
Illuminates, blinks or turns off the seat belt warning light. ·
Sounds the seat belt warning buzzer. |
| Main body ECU (multiplex network body ECU) | Sends the rear door courtesy switch signal to the combination meter assembly via CAN communication. |
| Power distribution box assembly | Sends the rear seat belt buckle switch signal to the main body ECU (multiplex network body ECU) via CXPI communication. |
| Skid control ECU (brake actuator assembly) | ·
Sends the parking brake signal to the combination meter assembly via CAN communication. ·
Sends the vehicle speed signal to the combination meter assembly via CAN communication. |
| Hybrid vehicle control ECU*1 | Sends the shift position signal to the combination meter assembly via CAN communication. |
| ECM*2 | Sends the shift position signal to the combination meter assembly via CAN communication. |
*1: for HV Model
*2: for Gasoline Model