RM3660EC _51 Engine / Hybrid System _080773 HYBRID / BATTERY CONTROL _0600293 HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY) D

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY)  REGISTRATION / INITIALIZATION / LEARNING  


HIGH VOLTAGE FUSE ACCUMULATED LOAD HISTORY RESET


HINT:

If the hybrid battery terminal block has been replaced, make sure to perform "High Voltage Fuse Accumulated Load History Reset" and then clear the DTCs.

DTC P0A9563 will be stored again if do not perform "High Voltage Fuse Accumulated Load History Reset".


a.

Enter the following menus.

Powertrain > HV Battery > Utility
Tester Display
High Voltage Fuse Accumulated Load History Reset
50005 398 8002

b.

According to the display on the GTS, perform High Voltage Fuse Accumulated Load History Reset and check that "High Voltage Fuse Accumulated Load History Reset is complete." is displayed.

NOTICE:
·

Performing High Voltage Fuse Accumulated Load History Reset takes approximately 20 to 25 minutes.

·

Make sure to confirm that "High Voltage Fuse Accumulated Load History Reset is complete." is displayed on GTS.

·

If "High Voltage Fuse Accumulated Load History Reset has failed. Do you want to try again?" is displayed on the GTS, perform the procedure again.




c.

Turn the ignition switch off.