CUSTOMIZE LIGHTING SYSTEM (INT)
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing using the GTS
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Interior Lights ON when Approached Function | Lights up the following lights when the door linked switch of the map light assembly is on, the switch of the No. 1 room light assembly is in the DOOR position and the electrical key transmitter sub-assembly is brought near the vehicle*1:
·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 |
Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
| Interior Lights ON when Door Unlocked Function | Lights up the following lights automatically when the door linked switch of the map light assembly is on, the switch of the No. 1 room light assembly is in the DOOR position and the doors are unlocked by an unlock operation:
·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Footwell Light (LH/RH)*6 |
Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
| Interior Lights ON when IG OFF Function | Lights up the following lights automatically when the door linked switch of the map light assembly is on, the switch of the No. 1 room light assembly is in the DOOR position and the ignition switch is turned from on (IG) or on (ACC) to off:
·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Push Start Switch Illumination*1 ·
Footwell Light (LH/RH)*6 |
Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
| Light Control Function | Dims the following lights when the ignition switch is on (IG) and the shift lever is moved to any position other than P:
·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Push Start Switch Illumination*1 ·
Footwell Light (LH/RH)*6 |
Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
| Interior Illumination Light 1 Function | Turns on the following lights:
·
Center Tray Illumination Light*2 ·
Cup Holder Light*3 ·
Push Start Switch Illumination*1 ·
Footwell Light (LH/RH)*6 |
Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
| Interior Illumination Light 2 Function | - | - | $00:Disable,$01:Enable | Cannot be used |
| Interior Lights Lighting Timer Setting | Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light assembly is on and the switch of the No. 1 room light assembly is in the DOOR position*7:
·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 |
Normal | $00:Normal,$01:Short,$02:Long | Main body ECU (Multiplex network body ECU) |
| Interior Lights ON Function | Lights up the following lights*7:
·
Map Light Assembly ·
Spot Light Assembly*4 ·
No. 1 Room Light Assembly*5 ·
No. 1 Luggage Compartment Light Assembly |
Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
*1: w/ Smart entry and start system
*2: w/ Center tray illumination light
*3: w/ Cup holder light
*4: Type A
*5: Type B
*6: w/ Footwell light
*7: Customize settings may not be able to be selected from "Illuminated Entry" if the vehicle recognizes driver 1, 2 or 3 with the My Settings function. In that case, change the settings from "My Settings".
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Start Switch Light Function | Setting for the function to turn on the push start switch illumination. | ON | $00:OFF,$01:ON | Certification ECU (Smart key ECU assembly) |
Customizing with the multi-display
Turn the ignition switch to ON.
Enter the following menus: MENU / Settings / Vehicle Customize / Lights.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
|
*1: Type A *2: Type B |
||||
| Interior Lights Auto-off Timer | 15 sec. | Changes the lighting time of the following lights that are operated by the timer function when the door linked switch of the map light assembly is on and the switch of the No. 1 room light assembly is in the DOOR position:
·
Map Light Assembly ·
Spot Light Assembly*1 ·
No. 1 Room Light Assembly*2 ·
No. 1 Luggage Compartment Light Assembly |
Off, 7.5 sec., 15 sec., 30 sec. | Main body ECU (Multiplex network body ECU) |