RM3660EC _59 Vehicle Exterior _080745 WINDOW / GLASS _0600091 POWER WINDOW CONTROL SYSTEM(except NR Series Engine) C

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(except NR Series Engine)  B2312  Power Window Switch Malfunction  


DESCRIPTION

This DTC is stored when the ECU built into a multiplex network master switch assembly determine that the multiplex network master switch assembly is stuck.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
B2312 Power Window Switch Malfunction
·

Multiplex network master switch assembly stuck

·

Multiplex network master switch assembly held in same position for more than 20 seconds


Multiplex network master switch assembly Master Switch

CAUTION / NOTICE / HINT

NOTICE:

The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM (except NR Series Engine)>HOW TO PROCEED WITH TROUBLESHOOTING


HINT:

If DTC B2312 is not output again after the DTC has been cleared, the DTC was stored due to the switch being held in the same position continuously.


PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Master Switch > Clear DTCs
50002 148

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Body Electrical > Master Switch > Trouble Codes
50001 148

Result:
Result Proceed to
B2312 is output A
B2312 is not output B



A

B

END (DTC WAS STORED DUE TO SWITCH BEING OPERATED FOR 20 SECONDS OR MORE)