DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Normal Condition | Reference Value | Diagnostic Note |
|---|---|---|---|---|
| Auto High Beam Main Switch | Auto high beam switch signal | OFF or ON | OFF: Auto high beam switch not pressed
ON: Auto high beam switch pressed |
w/ Automatic High Beam System |
| Light Control Switch (HEAD) | Light control switch head position signal | OFF or ON | OFF: Light control switch not in head position
ON: Light control switch in head position |
- |
| Insolation Amount of Solar Sensor RH | Automatic light control sensor RH condition | 0 to 51100 or SensorFail | Condition can be displayed | - |
| Insolation Amount of Solar Sensor LH | Automatic light control sensor LH condition | 0 to 51100 or SensorFail | Condition can be displayed | - |
| Light Sensor Illuminance | Automatic light control sensor illuminance | 0 to 8191 lx or SensorFail | Value is output according to ambient light level | The displayed value is "0" when no light is detected. |
| AHS Function | Adaptive high beam system control function | Not Available or Available | Not Available: Adaptive high beam system control unavailable
Available: Adaptive high beam system control valid |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| High Beam Headlights (By AHS ECU) | Adaptive high beam system high beam operation status | Light OFF or Light ON | Light OFF: Adaptive high beam system high beam off
Light ON: Adaptive high beam system high beam on |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Light Sensor Connection History | Automatic light control sensor connection status | Without or With | Without: Automatic light control sensor has not been connected
With: Automatic light control sensor connected or has been connected |
- |
| Headlight ECU Function | ECU which controls the lighting system | Not Available or Available | Not Available: Headlight ECU control unavailable
Available: Headlight ECU control valid |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| LDM ECU Function | ECU which controls the lighting system | Not Available or Available | Not Available: Light control LED ECU control unavailable
Available: Light control LED ECU control valid |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Automatic High Beam Headlights Sensor Detection Status | Automatic high beam sensor current state | Undetected, N/A, No sens, Headlight, Taillight, Speed, Daytime, Village, Other sens, Change, Out of aim, SAE Mod, Aim adjust or LIN Err | Condition can be displayed* | If the value of this item is not as specified, the automatic high beam sensor system may be malfunctioning. |
| Communication Power Integration No.1 | Connection status between semiconductor power integration ECU and main body ECU (multiplex network body ECU) | STOP or OK | STOP: No connection
OK: Connection |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Communication Power Integration No.2 | Connection status between No. 2 semiconductor power integration ECU and main body ECU (multiplex network body ECU) | STOP or OK | STOP: No connection
OK: Connection |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Communication Power Integration No.3 | Connection status between No. 3 semiconductor power integration ECU and main body ECU (multiplex network body ECU) | STOP or OK | STOP: No connection
OK: Connection |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Communication Power Distribution Box | Connection status between power distribution box assembly and main body ECU (multiplex network body ECU) | STOP or OK | STOP: No connection
OK: Connection |
When there is a malfunction, a DTC is stored |
| Communication LDM LH | Connection status between light control LED ECU LH and main body ECU (multiplex network body ECU) | STOP or OK | STOP: No connection
OK: Connection |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Communication LDM RH | Connection status between light control LED ECU RH and main body ECU (multiplex network body ECU) | STOP or OK | STOP: No connection
OK: Connection |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Tail Remind Buzzer Function | Setting of the tail remind buzzer function on/off | Disable or Enable | Customize setting displayed | - |
| Automatic Light Off Timing Setting | Taillight off timing setting when light control switch is in tail or head position | IG OFF or Door Open | Customize setting displayed | - |
| Response Time Adjust | Delay timing of lighting the taillights when the automatic light control sensor detects brightness change | Normal or Long | Customize setting displayed | - |
| Brightness Level Adjust (Lowering) | Ambient brightness level required to dim display lights (combination meter, navigation display, etc.) | Normal, Dark2, Dark1, Light1 or Light2 | Customize setting displayed | - |
| Brightness Level Adjust (Canceling) | Ambient brightness level required to cancel dimming display lights (combination meter, navigation display, etc.) | Normal, Dark2, Dark1, Light1 or Light2 | Customize setting displayed | - |
| Sensitivity Adjust | Sensitivity of the automatic light control system | Normal, Dark2, Dark1, Light1 or Light2 | Customize setting displayed | - |
*: The details of each value of the Range are as follows:
| Display Value | Condition | Control Condition | Diagnostic Note |
|---|---|---|---|
| Undetected | Automatic high beam sensor being initialized | Control suspended (low beam headlights illuminated) | - |
| N/A | Automatic high beam sensor temporarily disabled due to high temperature, unclear image (due to dirt, fog, etc.), etc. | Control suspended (previous beam setting maintained) | - |
| No sens | No lights detected | High beam headlights illuminated | Only when vehicle speed within operation speed range |
| Headlight | Headlights of oncoming vehicle, etc. detected | Low beam headlights illuminated | Only when vehicle speed within operation speed range |
| Taillight | Taillights preceding vehicle, etc. detected | Low beam headlights illuminated | Only when vehicle speed within operation speed range |
| Speed | No lights detected and vehicle speed below operation speed | Low beam headlights illuminated | - |
| Daytime | Bright light detected | Low beam headlights illuminated | - |
| Village | Streetlights, etc. detected | Low beam headlights illuminated | Only when vehicle speed within operation speed range |
| Change | Changing between low beams and high beams | Changing between low beams and high beams | Only when vehicle speed within operation speed range |
| Other sens | Not applicable | - | - |
| Out of aim | |||
| SAE Mod | |||
| Aim adjust | |||
| LIN Err |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | Actual driven distance | 0 to 16777215 | Roughly the same as the actual driven distance | - |
| Total Distance Traveled - Unit | Actual driven distance unit | km or mile | Displays the current actual driven distance unit | - |
| Light OFF Switch | Light control switch off position signal | OFF or ON | OFF: Light control switch not in off position
ON: Light control switch in off position |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Auto Light Switch | Light control switch AUTO position signal | OFF or ON | OFF: Light control switch not in AUTO position
ON: Light control switch in AUTO position |
- |
| Head Light Switch (Tail) | Light control switch tail position signal | OFF or ON | OFF: Light control switch in neither tail nor head position
ON: Light control switch in tail or head position |
- |
| Head Light Switch (Head) | Light control switch head position signal | OFF or ON | OFF: Light control switch not in head position
ON: Light control switch in head position |
- |
| High Beam Main Switch | Dimmer switch high position signal | OFF or ON | OFF: Dimmer switch not in high position
ON: Dimmer switch in high position |
- |
| Passing Light Switch | Dimmer switch high flash position (pass) signal | OFF or ON | OFF: Dimmer switch not in high flash position
ON: Dimmer switch in high flash position |
- |
| Auto High Beam Main Switch | Auto high beam switch signal | OFF or ON | OFF: Auto high beam switch off
ON: Auto high beam switch on |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Turn Signal Switch (Right) | Turn signal switch (right turn position) signal | OFF or ON | OFF: Turn signal switch not in right turn position
ON: Turn signal switch in right turn position |
- |
| Turn Signal Switch (Left) | Turn signal switch (left turn position) signal | OFF or ON | OFF: Turn signal switch not in left turn position
ON: Turn signal switch in left turn position |
- |
| Cornering Light/Front Side Illuminate Light Switch | Turn signal switch (full turn) signal | OFF or ON | OFF: Turn signal switch not in left or right turn position
ON: Turn signal switch in left or right full turn position |
- |
| Front Fog Light Switch | Front fog light switch signal | OFF or ON | OFF: Front fog light switch off
ON: Front fog light switch on |
w/ Front Fog Light |
| Rear Fog Light/Bad Weather Switch | Rear fog light switch signal | OFF or ON | OFF: Rear fog light switch off
ON: Rear fog light switch on |
- |
| Automatic Light Equipped Info | Automatic light control system specification information | Unknown, With or Without | Unknown: Specification not stored
With: Automatic light control system equipped Without: Automatic light control system not equipped |
- |
| Bad Weather Mode Equipped Info | Bad weather specification information | Unknown, Without or With | Unknown: Specification not stored
Without: Bad weather specification not equipped With: Bad weather specification equipped |
- |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Turn Signal Switch (Left) | Turn signal switch (left) signal | OFF or ON | OFF: Turn signal switch not in left turn position
ON: Turn signal switch in left turn position |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Turn Signal Switch (Right) | Turn signal switch (right) signal | OFF or ON | OFF: Turn signal switch not in right turn position
ON: Turn signal switch in right turn position |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Turn Switch Signal (Full Turn) | Turn signal switch (full turn) signal | OFF or ON | OFF: Turn signal switch not in left or right turn position
ON: Turn signal switch in left or right turn position |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Hazard Flasher Switch | Hazard warning signal switch signal | OFF or ON | OFF: Hazard warning signal switch off
ON: Hazard warning signal switch on |
- |
| Tester Display | Measurement Item | Normal Condition | Reference Value | Diagnostic Note |
|---|---|---|---|---|
| Back-up Light Input Signal | Back-up light input | OFF or ON | OFF: Shift lever in any position other than R
ON: Shift lever in R |
- |
| Back-up Light Output Signal | Back-up light output | OFF or ON | OFF: Back-up light off
ON: Back-up light on |
Although the item is displayed on the GTS, it is not applicable to this vehicle. |
| Back-up Light Output Current | Back-up light circuit current | 0.0 to 255.0 A | Below 5.3 A | Back-up light when output is on |
| Back-up Light Fuse Shut Off Status | Back-up light fuse shut off status | OFF or ON | OFF: Fuse has no shut off history
ON: Fuse has shut off history |
- |
| Back-up Light Fuse Shut Off Count | Back-up light fuse shut off history | 0 to 255 | 0 | - |
| Tail Light Internal Relay Input Signal | Taillight internal relay input | OFF or ON | OFF: Taillights off
ON: Taillights on |
- |
| Tail Light Internal Relay Output Signal | Taillight internal relay output | OFF or ON | OFF: Taillights off
ON: Taillights on |
- |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Headlight Relay / Light Power Supply Relay | Low beam headlights | OFF or ON | - |
| High Beam Headlight | High beam headlights | OFF or ON | - |
| Daytime Running Light | Daytime running lights | OFF or ON | - |
| Automatic High Beam Switch Light | Auto high beam switch indicator light | OFF or ON | w/ Automatic High Beam System |
| Dimmer Signal | Dimmer signal | OFF or ON | State where circumference illumination is bright. |
| Rear Fog Light | Rear fog lights | OFF or ON | - |
| Front Fog Light | Front fog lights | OFF or ON | w/ Front Fog Light |
| Taillight / Clearance Light | Taillights/clearance lights | OFF or ON | - |