AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK
Make sure that the customize settings are set to default when performing the automatic light control system operation check.
Turn the ignition switch to ON.
Turn the light control switch to the AUTO position.
Cover the automatic light control sensor.
Check that the taillights and low beam headlights come on.
Uncover the automatic light control sensor.
Check that the low beam headlights and taillights turn off.
LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK
Make sure that the customize settings are set to default when performing the light auto turn-off system operation check.
Close all of the doors.
Turn the ignition switch to ON.
Turn the taillights, low beam headlights, high beam headlights, front fog lights* and rear fog lights on.
Turn the ignition switch off.
Open the driver door.
Check that all of the lights turn off immediately.
*: w/ Front Fog Light
DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK
Turn the ignition switch to ON (READY). *1
Start the engine.*2
Turn the light control switch to the AUTO position (with the low beam headlights not turned on via the automatic light control system).
Release the parking brake.
Check that the daytime running lights come on.
*1: for HV Model
*2: for Gasoline Model
MANUAL HEADLIGHT BEAM LEVEL CONTROL SYSTEM OPERATION CHECK
Turn the ignition switch to ON (IG).
Turn the headlights on.
Turn the headlight leveling switch to "0".
Check that the headlight beam level changes when the headlight leveling switch is operated.