RM3660EC _56 Audio / Visual / Telematics _080753 TELEMATICS _0391552 TELEMATICS SYSTEM(for HV Model) J

TELEMATICS  TELEMATICS SYSTEM(for HV Model)  Remote Engine Starter does not Operate  


CAUTION / NOTICE / HINT

NOTICE:
·

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Registration for Telematics System.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for HV Model)>REGISTRATION

·

Before replacing the telematics transceiver, refer to Service Bulletin.



PROCEDURE

1.CHECK SMART ENTRY AND START SYSTEM (for Start Function)
a.

Check that the hybrid system can be started by pressing the power switch.


Result:
Result Proceed to
Hybrid system can be started. A
Hybrid system cannot be started. B



A

2.REGISTRATION

B

2.REGISTRATION
HINT:
If registration is not performed after replacing any of the following parts, the remote engine start and stop will not be available.
·

Certification ECU (smart key ECU assembly)

·

telematics transceiver



a.

Perform remote engine start and stop registration.

HINT:

Refer to Service Bulletin.



b.

Check if the problem symptom recurs.


Result:
Result Proceed to
System does not return to normal. A
System returns to normal. B



A

CONTACT SERVICE CENTER

B

END