RM3660EC _54 Brake _080770 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0392591 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model)  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Note
C052696 Steering Angle Sensor Module Component Internal Failure With the +BS terminal voltage between 9.6 and 16.5 V, a steering angle sensor internal malfunction signal is received from the steering angle sensor. Steering angle sensor Does not come on Brake/EPB Output ECU: Skid control ECU (brake actuator assembly)

PROCEDURE

1.REPLACE STEERING ANGLE SENSOR
a.

Replace the steering angle sensor.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>STEERING ANGLE SENSOR>REMOVAL


Result:
Proceed to
NEXT



NEXT

END