RM3660EC _54 Brake _080770 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0392591 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model)  C05262A  Steering Angle Sensor Module Signal Stuck In Range  


DESCRIPTION

The skid control ECU (brake actuator assembly) determines the steering angle value based on data obtained from the steering angle sensor, yaw rate and acceleration sensor (airbag sensor with ECU assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Note
C05262A Steering Angle Sensor Module Signal Stuck In Range When the change in steering angle sensor angle is 5° or less, left and right movements of the vehicle are detected. Steering angle sensor Does not come on Brake/EPB Output ECU: Skid control ECU (brake actuator assembly)

PROCEDURE

1.REPLACE STEERING ANGLE SENSOR
a.

Replace the steering angle sensor.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>STEERING ANGLE SENSOR>REMOVAL


Result:
Proceed to
NEXT



NEXT

END