RM3660EC _54 Brake _080771 BRAKE SYSTEM (OTHER) _0392403 BRAKE SYSTEM(for HV Model) G

BRAKE SYSTEM (OTHER)  BRAKE SYSTEM(for HV Model)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:

DTCs may be stored during the inspection procedure. Be sure to clear the DTCs and check that no DTCs are output after the inspection is finished.


PROCEDURE

Hide 47210L 1.INSPECT BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

a.
C504036C01
2.698,0.375 3.115,0.375 false 0.625,0.365 1.083,0.365 false 0.292,3.052 0.292,2.635 0.292,2.635 0.458,2.635 true 3.156,0.281 3.427,0.542 0.271,0.26 10 false *a 1.125,0.281 1.573,0.615 0.448,0.333 10 false *b 0.49,2.542 0.688,2.729 0.198,0.188 10 true *c
*a Pedal Effort Gauge
*b SST (LSPV Gauge)
*c SST (No. 1 Nipple)


Remove the front disc brake cylinder bleeder plug and set a pedal effort gauge and SST.

SST
09709-29018  (09709-00060)


b.

Bleed air from SST (LSPV gauge).

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for HV Model)>BLEEDING


c.

Shift lever in P and the parking brake applied.


d.

Turn the ignition switch to ON (READY), check the hydraulic pressure by depressing the brake pedal.

Standard Result:
Pedal Effort Hydraulic Pressure
50 N (5 kgf, 11.2 lbf) 2.6 MPa (26.5 kgf/cm2, 377 psi)
100 N (10 kgf, 22.5 lbf) 6.3 MPa (64.2 kgf/cm2, 914 psi)
150 N (15 kgf, 33.7 lbf) 9.9 MPa (101.0 kgf/cm2, 1436 psi)
200 N (20 kgf, 45.0 lbf) 12.3 MPa (125.4 kgf/cm2, 1784 psi)



e.

Remove the pedal effort gauge and SST, and bleed the brake line.

Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for HV Model)>BLEEDING