When removing and installing the combination meter glass, make sure not to touch the display panel.
Do not allow any dirt, fingerprints, grease, etc., to adhere to the combination meter glass. If the glass is dirty, wipe it clean with a soft cloth.
1.REMOVE COMBINATION METER RUBBER TRIM (for TFTM Made)
for Optitron Meter Type:
Remove the 4 combination meter rubber trims.
83138G
2.REMOVE COMBINATION METER GLASS (for Optitron Meter Type)
Disengage the 10 claws to remove the combination meter glass.
83138G
3.REMOVE COMBINATION METER GLASS (for TFT Meter Type)
Disengage the 8 claws to remove the combination meter glass.