☰ Toyota Levin Hybrid☰ فهرستPower Source / Network › 8ZR-FXE BATTERY / CHARGING › BATTERY CURRENT SENSOR
RM3660EC
_57
Power Source / Network
_080757
8ZR-FXE BATTERY / CHARGING
_0392370
BATTERY CURRENT SENSOR
A
8ZR-FXE BATTERY / CHARGING BATTERY CURRENT SENSOR INSTALLATION
PROCEDURE
28850C
1.INSTALL BATTERY STATE SENSOR ASSEMBLY
a.
Engage the 3 claws to install the battery state sensor assembly to the battery current sensor holder.
b.
Connect the battery state sensor assembly connector.
c.
Install the battery state sensor assembly to the auxiliary battery and tighten the nut.
- Torque:
- 5.4 N*m (55 kgf*cm, 48 in.*lbf)
d.
Connect the engine wire to the battery state sensor assembly with the nut.
- Torque:
- 7.6 N*m (77 kgf*cm, 67 in.*lbf)
2. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
- HINT:
-
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.