RM3660EC _58 Vehicle Interior _080741 SUPPLEMENTAL RESTRAINT SYSTEMS _0584471 AIRBAG SYSTEM(except NR Series Engine) C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(except NR Series Engine)  B009384  Left Side Restraints Sensor 3 Signal Below Allowable Range  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate DTC Output from Priority Test Mode / Check Mode
B009384 Left Side Restraints Sensor 3 Signal Below Allowable Range
·

Side No. 2 airbag sensor LH malfunction

·

Airbag sensor with ECU assembly malfunction


·

Side No. 2 airbag sensor LH

·

Airbag sensor with ECU assembly


Comes on SRS Airbag A Does not apply to test/check mode

CAUTION / NOTICE / HINT

NOTICE:
·

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>BEFORE DISCONNECTING BATTERY

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART




PROCEDURE

1.CLEAR DTC

Pre-procedure1

a.
C400939C08
1.667,1.115 1.667,0.771 false 0.917,0.625 1.229,0.781 0.313,0.156 10 false *1 2.427,0.875 2.74,1.031 0.313,0.156 10 false *2 1.604,1.135 1.917,1.292 0.313,0.156 10 false *3
*1 Side No. 2 Airbag Sensor RH
*2 Airbag Sensor with ECU Assembly
*3 Wire Harness


Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.


c.

Interchange the side No. 2 airbag sensor LH with RH and connect the connectors to them.


d.

Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.


e.

Turn the ignition switch to ON, and wait for at least 60 seconds.


Procedure1

f.

Clear the DTCs stored in memory.

Body Electrical > SRS Airbag > Clear DTCs
50002 444
Result:
Proceed to
NEXT



Post-procedure1

g.

Turn the ignition switch off.



NEXT

2.CHECK SIDE NO. 2 AIRBAG SENSOR LH
2.CHECK SIDE NO. 2 AIRBAG SENSOR LH

Pre-procedure1

a.

Turn the ignition switch to ON, and wait for at least 60 seconds.


Procedure1

b.

Check for DTCs.

Body Electrical > SRS Airbag > Trouble Codes
50001 444
Result:
Result Proceed to
B009384 is output A
B009884 is output B
B009384 and B009884 are not output C


HINT:

Codes other than DTCs B009384 and B009884 may be output at this time, but they are not related to this check.



Post-procedure1

c.

Turn the ignition switch off.


d.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 60 seconds.


e.

Return the side No. 2 airbag sensor RH and LH to their original positions and connect the connectors to them.



A

B

C