RM3660EC _51 Engine / Hybrid System _080778 8ZR-FXE ENGINE CONTROL _0392138 IGNITION COIL AND SPARK PLUG A

8ZR-FXE ENGINE CONTROL IGNITION COIL AND SPARK PLUG REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ignition coil assembly or spark plug removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
· Replacement of ignition coil assembly · Replacement of spark plug	Inspection After Repair	· Poor idle, etc. · Engine start function, etc.	(202304,999999,_51,_080778,_0393982,RM100000002BDLI,)

PROCEDURE

Hide Display 19500 1.REMOVE IGNITION COIL ASSEMBLY

Disconnect the 4 ignition coil assembly connectors.

Remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.

NOTICE:: If an ignition coil assembly has been struck or dropped, replace it.

HINT:: Arrange the removed parts in the correct order.

Hide Display 19100P 2.REMOVE SPARK PLUG

Click hereGeneral>MAINTENANCE>8ZR-FXE SPARK PLUG>REMOVAL201906,999999,_V1,_080956,_0392144,RM100000001HO9E_01_0004,