RM3660EC _51 Engine / Hybrid System _080774 STOP AND START _0393362 STOP AND START SYSTEM T

STOP AND START  STOP AND START SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Stop and Start System
Symptom Suspected Area Link
Stop and start system does not operate Refer to "Stop and Start System does not Operate" Click here
Refer to "Stop and Start System does not Operate (Battery Condition)" Click here
Restarting after a short period of time from an idling stop Refer to "Restarting after a Short Period of Time from an Idling Stop" Click here
After engine stops due to stop and start system, engine does not restart Refer to "After Engine Stops due to Stop and Start System, Engine does not Restart" Click here
Stop and start cancel indicator does not operate Combination meter assembly Click here
Indicator circuit (CAN communication system) Click here
Engine stop and start ECU Click here
Stop and start indicator does not operate Combination meter assembly Click here
Indicator circuit (CAN communication system) Click here
Engine stop and start ECU Click here
Stop and start control cannot be canceled ECAN terminal voltage Click here
Stop and start cancel switch circuit Click here
Multi-information display screen does not change after pressing steering pad switch assembly Stop and start priority control system Click here
Multi-information display screen changes without pressing steering pad switch assembly Stop and start priority control system Click here
The control mode changes but an interruption message is not displayed in the combination meter assembly Stop and start priority control system Click here
The control mode does not change but an interruption message is displayed in the combination meter assembly Stop and start priority control system Click here
Control mode returns to default mode after turning ignition switch to ON Stop and start priority control system Click here