The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after automatic transmission fluid replacement are shown below.
| Replacement Part or Procedure | Necessary Procedures | Effects/Inoperative when not Performed | Link |
|---|---|---|---|
| Automatic transmission fluid | ATF thermal degradation estimate reset | The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly | for 1GD-FTV:( 201902,999999,_52,_078741,_0388674,RM100000001H3C5,)
for 7GR-FKS:( 201902,999999,_52,_078741,_0385245,RM100000001GL7C,)
for 1GD-FTV for EGR with Exhaust Gas Temperature Sensor:( 202208,999999,_52,_078741,_0398020,RM1000000025HBT,)
|
1. BEFORE FILLING TRANSMISSION
2.REPLACE AUTOMATIC TRANSMISSION FLUID
3.ADJUST AUTOMATIC TRANSMISSION FLUID TEMPERATURE
4.CHECK AUTOMATIC TRANSMISSION FLUID LEVEL
5. AFTER FILLING TRANSMISSION
6. ATF THERMAL DEGRADATION ESTIMATE RESET
Approximately 50% or more of the ATF has been replaced during a repair of the transmission or a similar operation.
for 1GD-FTV:
for 7GR-FKS:
for 1GD-FTV for EGR with Exhaust Gas Temperature Sensor: