RM35X0E _59 Vehicle Exterior _079320 WIPER / WASHER _0385306 WIPER SWITCH G

WIPER / WASHER WIPER SWITCH INSPECTION

PROCEDURE

Hide Display 84650 1.INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for LH Side)

2.521,1.854 2.354,1.854 2.354,1.854 1.76,1.99 true 1.094,2.688 1.302,2.688 1.302,2.688 1.719,2.198 true 1.531,2.969 1.719,2.969 1.719,2.969 1.719,2.313 true 2.656,1.25 2.365,1.25 2.365,1.25 2.083,0.969 true 2.354,1.458 2.188,1.458 2.188,1.458 1.958,0.979 true 1.948,1.573 1.802,1.573 1.802,1.573 1.792,0.969 true 0.813,1.271 1.125,1.271 1.125,1.271 1.344,0.979 true 1.094,1.427 1.26,1.427 1.26,1.427 1.5,0.99 true 1.521,1.5 1.646,1.5 1.646,1.5 1.646,0.969 true 1.948,0.094 1.781,0.094 1.781,0.094 1.781,0.719 true 1.479,0.104 1.646,0.104 1.646,0.104 1.646,0.719 true 1.771,2.104 2.677,2.042 true 2.458,0.24 2.063,0.24 2.063,0.24 1.938,0.719 true 2.625,0.531 2.167,0.531 2.167,0.531 2.094,0.729 true 0.813,0.917 1.177,0.917 true 0.115,0.094 0.427,0.292 0.313,0.198 10 false *a 1.26,0.021 1.885,0.323 0.625,0.302 10 false VR 2,0.021 2.625,0.323 0.625,0.302 10 false E 2.729,1.177 3.354,1.479 0.625,0.302 10 false WF 0.302,1.198 0.927,1.5 0.625,0.302 10 false W_OFF 0.875,1.354 1.5,1.656 0.625,0.302 10 false +1 2.406,1.385 3.031,1.688 0.625,0.302 10 false MIST 1.323,1.427 1.948,1.729 0.625,0.302 10 false +2 2,1.479 2.625,1.781 0.625,0.302 10 false +S 2.583,1.781 3.146,2.083 0.563,0.302 10 false P4 2.729,1.958 3.292,2.26 0.563,0.302 10 false P3 0.875,2.604 1.438,2.906 0.563,0.302 10 false P2 1.323,2.896 1.885,3.198 0.563,0.302 10 false P1 2.521,0.156 3.146,0.458 0.625,0.302 10 false +1R 2.677,0.458 3.302,0.76 0.625,0.302 10 false C1R 0.552,0.833 1.177,1.135 0.625,0.302 10 false WR

*a	Component without harness connected (Windshield Wiper Switch Assembly)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Front Wiper Switch
Tester Connection	Condition	Specified Condition
11 (MIST) - 4 (E)	MIST position	Below 1 Ω
11 (MIST) - 4 (E)	Except MIST position	10 kΩ or higher
15 (W_OFF) - 4 (E)	OFF position	Below 1 Ω
15 (W_OFF) - 4 (E)	Except OFF position	10 kΩ or higher
12 (+S) - 4 (E)	AUTO position *A	Below 1 Ω
	INT position *B	Below 1 Ω
	Except AUTO position *A	10 kΩ or higher
	Except INT position *B	10 kΩ or higher
14 (+1) - 4 (E)	LO position	Below 1 Ω
14 (+1) - 4 (E)	Except LO position	10 kΩ or higher
13 (+2) - 4 (E)	HI position	Below 1 Ω
13 (+2) - 4 (E)	Except HI position	10 kΩ or higher

Front Washer Switch
Tester Connection	Condition	Specified Condition
10 (WF) - 4 (E)	ON position	Below 1 Ω
10 (WF) - 4 (E)	OFF position	10 kΩ or higher

Auto Sensitivity Adjustment Switch *A
Tester Connection	Condition	Specified Condition
5 (VR) - 4 (E)	P1 position	1102 to 1218 Ω
	P2 position	570 to 630 Ω
	P3 position	256.5 to 283.5 Ω
	P4 position	Below 1 Ω

Intermittent Time Adjustment Switch *B
Tester Connection	Condition	Specified Condition
A: w/ Auto Wiper System B: w/o Auto Wiper System
5 (VR) - 4 (E)	P1 position	1102 to 1218 Ω
	P2 position	570 to 630 Ω
	P3 position	256.5 to 283.5 Ω
	P4 position	Below 1 Ω

Rear Wiper Switch
Tester Connection	Condition	Specified Condition
*C: except Double Swing Out Type
3 (+1R) - 4 (E)	ON position *C	Below 1 Ω
2 (C1R) - 4 (E)	INT position	Below 1 Ω
3 (+1R) - 2 (C1R) - 4 (E)	OFF position	10 kΩ or higher

Rear Washer Switch *D
Tester Connection	Condition	Specified Condition
16 (WR) - 4 (E)	ON position	Below 1 Ω
16 (WR) - 4 (E)	OFF position	10 kΩ or higher

Camera Washer Switch *E
Tester Connection	Condition	Specified Condition
D: w/o Digital Inner Mirror E: w/ Digital Inner Mirror
16 (WR) - 4 (E)	ON position	Below 1 Ω
16 (WR) - 4 (E)	OFF position	10 kΩ or higher

If the result is not as specified, replace the windshield wiper switch assembly.

Hide Display 84650 2.INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY (for RH Side)

1.656,1.979 0.688,1.844 true 1.656,2.094 0.667,2.052 true 1.698,2.198 2.156,2.49 true 1.719,2.313 2.167,2.854 true 1.469,0.219 1.635,0.219 1.635,0.219 1.635,0.75 true 1.958,0.219 1.792,0.219 1.792,0.219 1.792,0.75 true 2.781,1.271 2.385,1.271 2.385,1.271 2.115,1 true 0.688,1.271 1.063,1.271 1.063,1.271 1.323,0.99 true 2.354,1.448 2.167,1.448 2.167,1.448 1.938,1 true 1.063,1.438 1.25,1.438 1.25,1.438 1.5,1 true 1.917,1.51 1.792,1.51 1.792,1.51 1.792,0.979 true 1.229,1.625 1.521,1.625 1.521,1.625 1.646,0.99 true 2.25,0.958 2.76,0.958 true 0.802,0.667 1.281,0.667 1.281,0.667 1.344,0.75 true 0.833,0.438 1.333,0.438 1.333,0.438 1.51,0.729 true 0.104,0.135 0.417,0.333 0.313,0.198 10 false *a 0.479,1.75 0.792,1.948 0.313,0.198 10 false P4 0.479,1.969 0.792,2.167 0.313,0.198 10 false P3 2.219,2.417 2.531,2.615 0.313,0.198 10 false P2 2.229,2.792 2.542,2.99 0.313,0.198 10 false P1 1.354,0.146 1.667,0.344 0.313,0.198 10 false E 2.01,0.146 2.323,0.344 0.313,0.198 10 false VR 2.844,1.177 3.396,1.417 0.552,0.24 10 false W_OFF 2.417,1.354 3.063,1.604 0.646,0.25 10 false +1 1.958,1.438 2.604,1.719 0.646,0.281 10 false +2 0.99,1.542 1.635,1.792 0.646,0.25 10 false +S 0.698,1.365 1.344,1.615 0.646,0.25 10 false MIST 0.438,1.198 1.083,1.448 0.646,0.25 10 false WF 2.792,0.865 3.198,1.073 0.406,0.208 10 false WR 0.521,0.594 1.167,0.844 0.646,0.25 10 false C1R 0.531,0.375 1.177,0.625 0.646,0.25 10 false +1R

*a	Component without harness connected (Windshield Wiper Switch Assembly)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Front Wiper Switch
Tester Connection	Condition	Specified Condition
14 (MIST) - 5 (E)	MIST position	Below 1 Ω
14 (MIST) - 5 (E)	Except MIST position	10 kΩ or higher
10 (W_OFF) - 5 (E)	OFF position	Below 1 Ω
10 (W_OFF) - 5 (E)	Except OFF position	10 kΩ or higher
13 (+S) - 5 (E)	AUTO position *A	Below 1 Ω
	INT position *B	Below 1 Ω
	Except AUTO position *A	10 kΩ or higher
	Except INT position *B	10 kΩ or higher
11 (+1) - 5 (E)	LO position	Below 1 Ω
11 (+1) - 5 (E)	Except LO position	10 kΩ or higher
12 (+2) - 5 (E)	HI position	Below 1 Ω
12 (+2) - 5 (E)	Except HI position	10 kΩ or higher

Front Washer Switch
Tester Connection	Condition	Specified Condition
15 (WF) - 5 (E)	ON position	Below 1 Ω
15 (WF) - 5 (E)	OFF position	10 kΩ or higher

Auto Sensitivity Adjustment Switch *A
Tester Connection	Condition	Specified Condition
4 (VR) - 5 (E)	P1 position	1102 to 1218 Ω
	P2 position	570 to 630 Ω
	P3 position	256.5 to 283.5 Ω
	P4 position	Below 1 Ω

Intermittent Time Adjustment Switch *B
Tester Connection	Condition	Specified Condition
A: w/ Auto Wiper System B: w/o Auto Wiper System
4 (VR) - 5 (E)	P1 position	1102 to 1218 Ω
	P2 position	570 to 630 Ω
	P3 position	256.5 to 283.5 Ω
	P4 position	Below 1 Ω

Rear Wiper Switch
Tester Connection	Condition	Specified Condition
*C: except Double Swing Out Type Back Door
6 (+1R) - 5 (E)	ON position *C	Below 1 Ω
7 (C1R) - 5 (E)	INT position	Below 1 Ω
6 (+1R) - 7 (C1R) - 5 (E)	OFF position	10 kΩ or higher

Rear Washer Switch *D
Tester Connection	Condition	Specified Condition
9 (WR) - 5 (E)	ON position	Below 1 Ω
9 (WR) - 5 (E)	OFF position	10 kΩ or higher

Camera Washer Switch *E
Tester Connection	Condition	Specified Condition
D: w/o Digital Inner Mirror E: w/ Digital Inner Mirror
9 (WR) - 5 (E)	ON position	Below 1 Ω
9 (WR) - 5 (E)	OFF position	10 kΩ or higher

If the result is not as specified, replace the windshield wiper switch assembly.