84319
1.INSPECT STEERING WHEEL SWITCH HOUSING (for LHD)
Check the resistance.
Inspect the light switch circuit.
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Steering Wheel Switch Housing) |
- | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the steering wheel switch housing. |
||
| z7-2 (L OFF) - z9-2 (L OFF) | Always | Below 1 Ω |
| z7-3 (T) - z9-14 (T) | ||
| z7-4 (H) - z9-5 (H) | ||
| z7-5 (A) - z9-10 (A) | ||
| z7-6 (HU) - z9-1 (HU) | ||
| z7-7 (HF) - z9-6 (HF) | ||
| z7-11 (BFG) - z9-4 (BFG) | ||
| z7-12 (B) - z9-13 (B) | ||
| z7-13 (EL) - z9-12 (EL) | ||
Inspect the turn signal switch circuit.
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Steering Wheel Switch Housing) |
- | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the steering wheel switch housing. |
||
| z7-8 (TR) - z9-9 (TR) | Always | Below 1 Ω |
| z7-9 (TL) - z9-3 (TL) | ||
| z7-10 (CR) - z9-11 (CR) | ||
| z7-13 (EL) - z9-12 (EL) | ||
Inspect the wiper switch circuit.
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Steering Wheel Switch Housing) |
- | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
*A: except Double Swing Out Type If the result is not as specified, replace the steering wheel switch housing. |
||
| z7-24 (W_OFF) - z6-10 (W_OFF) | Always | Below 1 Ω |
| z7-25 (+S) - z6-13 (+S) | ||
| z7-26 (+1) - z6-11 (+1) | ||
| z7-27 (+2) - z6-12 (+2) | ||
| z7-28 (MIST) - z6-14 (MIST) | ||
| z7-29 (C1R) - z6-7 (C1R) | ||
| z7-30 (+1R) - z6-6 (+1R) *A | ||
| z7-31 (WF) - z6-15 (WF) | ||
| z7-32 (WR) - z6-9 (WR) | ||
| z7-33 (E) - z6-5 (E) | ||
| z7-34 (VR) - z6-4 (VR) | ||
84319
2.INSPECT STEERING WHEEL SWITCH HOUSING (for RHD)
Check the resistance.
Inspect the light switch circuit.
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Steering Wheel Switch Housing) |
- | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the steering wheel switch housing. |
||
| z7-2 (L OFF)- z6-15 (L OFF) | Always | Below 1 Ω |
| z7-3 (T) - z6-3 (T) | ||
| z7-4 (H) - z6-12 (H) | ||
| z7-5 (A) - z6-7 (A) | ||
| z7-6 (HU) - z6-16 (HU) | ||
| z7-7 (HF) - z6-11 (HF) | ||
| z7-11 (BFG) - z6-13 (BFG) | ||
| z7-12 (B) - z6-4 (B) | ||
| z7-13 (EL) - z6-5 (EL) | ||
Inspect the turn signal switch circuit.
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Steering Wheel Switch Housing) |
- | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the steering wheel switch housing. |
||
| z7-8 (TR) - z6-8 (TR) | Always | Below 1 Ω |
| z7-9 (TL) - z6-14 (TL) | ||
| z7-10 (CR) - z6-6 (CR) | ||
| z7-13 (EL) - z6-5 (EL) | ||
Inspect the wiper switch circuit.
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Steering Wheel Switch Housing) |
- | - |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
*A: except Double Swing Out Type If the result is not as specified, replace the steering wheel switch housing. |
||
| z7-24 (W_OFF) - z9-15 (W_OFF) | Always | Below 1 Ω |
| z7-25 (+S) - z9-12 (+S) | ||
| z7-26 (+1) - z9-14 (+1) | ||
| z7-27 (+2) - z9-13 (+2) | ||
| z7-28 (MIST) - z9-11 (MIST) | ||
| z7-29 (C1R) - z9-2 (C1R) | ||
| z7-30 (+1R) - z9-3 (+1R) *A | ||
| z7-31 (WF) - z9-10 (WF) | ||
| z7-32 (WR) - z9-16 (WR) | ||
| z7-33 (E) - z9-4 (E) | ||
| z7-34 (VR) - z9-5 (VR) | ||