RM35X0E _59 Vehicle Exterior _078503 DOOR / HATCH _0545664 BACK DOOR WEATHERSTRIP(for Double Swing Out Type) A

DOOR / HATCH  BACK DOOR WEATHERSTRIP(for Double Swing Out Type)  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.

Remove any non-drying sealer on the body with non-residue solvent.


b.

Align the joint of a new back door weatherstrip with the back door lock striker and temporarily install the back door weatherstrip.

B654201C01
0.969,0.417 1.354,0.594 true 5.865,0.573 6.125,0.458 true 5.74,4.271 6.229,4.156 true 0.708,4.177 1.354,4.208 true 3.583,3.229 3.813,3.417 true 3.583,7.25 3.813,7.438 true 0.042,0.063 0.417,0.302 0.375,0.24 12 false *A 0.094,3.792 0.469,4.031 0.375,0.24 12 false *B 0.542,4.063 0.917,4.302 0.375,0.24 10 false *a 6.25,4.063 6.625,4.302 0.375,0.24 10 false *a 6.156,0.344 6.531,0.583 0.375,0.24 10 false *a 0.792,0.302 1.167,0.542 0.375,0.24 10 false *a 3.865,7.396 4.073,7.594 0.208,0.198 10 true *b 3.854,3.396 4.063,3.594 0.208,0.198 10 true *b
*A for Standard Roof *B for High Roof
*a Matchmarks *b Joint
V100135

Flange Position - -


NOTICE:

When installing, make sure that non-drying sealer does not adhere to the body and back door.



c.

Align the matchmarks on the back door weatherstrip with the flanges on the vehicle body indicated by the arrows, and install the back door weatherstrip.

NOTICE:

Always align the matchmark when installing the part. If the matchmark position is out of place, water leaks may occur.


HINT:

To easily install the weatherstrip, first install the area with the matchmark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.