RM35X0E _51 Engine / Hybrid System _078720 7GR-FKS ENGINE CONTROL _0389159 POWER STEERING OIL PRESSURE SWITCH A

7GR-FKS ENGINE CONTROL  POWER STEERING OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 89438C 1.INSTALL POWER STEERING OIL PRESSURE SWITCH

a.

Install a new O-ring to the power steering oil pressure switch.


b.

Apply a light coat of power steering fluid to the O-ring.

HINT:
·

When reusing the power steering oil pressure switch, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the power steering oil pressure switch.




c.
A443590

Using a 24 mm deep socket wrench, install the power steering oil pressure switch.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the power steering oil pressure switch (surface which contacts the pressure feed tube).

·

Be careful not to damage the O-ring when installing the power steering oil pressure switch




d.

Connect the power steering oil pressure switch connector.


Hide 2.ADD POWER STEERING FLUID

Hide 4.INSPECT FOR POWER STEERING FLUID LEAK