DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Telematics / Data List.
According to the display on the GTS, read the "Data List".
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | Total distance traveled | Min.: 0, Max.: 16777215 | - | - |
| Total Distance Traveled - Unit | Total distance traveled unit | -, km or mile | - | - |
| IMEI | IMEI of telematics transceiver | 15 digits | - | - |
| Software Version High | Software version of telematics transceiver (10 digits from left) | 10 digits | - | - |
| Software Version Low | Software version of telematics transceiver (10 digits from right) | 10 digits | - | - |
| MSISDN | MSISDN of telematics transceiver | 16 digits | - | - |
| PLMN(MCC) | MCC of telematics transceiver | 3 digits | - | - |
| PLMN(MNC) | MNC of telematics transceiver | 3 digits | - | - |
| ICCID(High) | ICCID of telematics transceiver (10 digits from left) | 10 digits | - | - |
| ICCID(Low) | ICCID of telematics transceiver (10 digits from right) | 10 digits | - | - |
| Communication Status with TSC | Communication status with TOYOTA Connect Center | Incomplete or Complete | Complete | - |
| Telematics Activation Status | DCM activation status | Shipping or Active | Shipping: Not activated
Active: Activated |
- |
| Remote Vehicle Tracking | Display "Remote Vehicle Tracking" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Brand TOYOTA | Bland name | No or Yes | No: Except TOYOTA Brand
YES: TOYOTA Brand |
- |
| OTA Reprogramming | Display "OTA Reprogramming" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| HELPNET Function | Display "Helpnet" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Information Collection via Ethernet | Display "Information Connection via Ethernet" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Information Collection via CAN | Display "Information Collection via CAN" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Service Function | Display "Remote Service" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Vehicle State Notification | Display "Vehicle State Notification" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Stolen Vehicle Tracking | Display "Stolen Vehicle Tracking" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| IP Remote Detected DTC | Display "IP Remote Detected DTC" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| IP Remote FFD | Display "IP Remote FFD" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| IP Remote Monitoring | Display "IP Remote Monitoring" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Warning | Display "Remote Warning" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Detected DTC | Display "Remote Detected DTC" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote FFD | Display "Remote FFD" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Detect DTC | Display "Remote Detect DTC" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Confirmation | Display "Remote Confirmation" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Precaution | Display "Remote Precaution" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Monitoring | Display "Remote Monitoring" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Diagnostics Recorder | Display "Remote Diagnostics Recorder" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Operation | Display "Remote Operation" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Alarm Notification | Display "Alarm Notification" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Immobilizer | Display "Remote Immobilizer" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Vehicle Location | Display "Remote Vehicle Location" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Navigation Display | Display "Remote Navigation Display" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote Vehicle Control History | Display "Remote Vehicle Control History" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Maintenance Message | Display "Maintenance Message" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Remote A/C by Smart Key | Display "Remote A/C by Smart Key" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| eConnect State Notification | Display "eConnect State Notification" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| eConnect Event Notification | Display "eConnect Event Notification" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| eConnect State Change Notification | Display "eConnect State Change Notification" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| eConnect Remote Operation | Display "eConnect Remote Operation" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Driving Trip Data Notification | Display "Driving Trip Data Notification" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| eConnect Remote Vehicle Location | Display "eConnect Remote Vehicle Location" function enabled/disabled status | Disable or Enable | Disable: Following function disabled
Enable: Following function enabled |
- |
| Helpnet Account Status | Display emergency call service account status | No Account, With Account or Other | - | - |
| Telematics Microphone Volume Adjust | Setting of Telematics Microphone Volume Adjust | Min.: 1, Max.:11 | Displays customize setting of Telematics Microphone Volume Adjust | - |
| Telematics Speaker Volume Adjust | Setting of Telematics Speaker Volume Adjust | Min.: 1, Max.:14 | Displays customize setting of Telematics Speaker Volume Adjust | - |
| Remote Door Lock Function | Remote Door Lock Function registration status | Not Registered, Registered or Registration Not Required | - | - |
| Communication Pausing State | Display "Communication Pausing" function status | Cancel Pausing or Pausing | - | - |
| Green Indicator | The green indicator light on the manual (SOS) switch panel illumination status | Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness | - | - |
| Red Indicator | The red indicator light on the manual (SOS) switch panel illumination status | Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness | - | - |
| Beep | Beep volume | Min.: 1, Max.:14 | - | - |
ACTIVE TEST
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Telematics / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Green Indicator | Operate Manual (SOS) Switch Green Indicator | Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness | Operate with ignition switch ON and the vehicle stopped. |
| Red Indicator | Operate Manual (SOS) Switch Red Indicator | Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness | Operate with ignition switch ON and the vehicle stopped. |
| Beep | Operate speakers | Min.: 1, Max.:14 | Operate with ignition switch ON and the vehicle stopped. |