RM35X0E _V1 General _080617 SPECIFICATIONS _0393324 LIGHTING (EXT) F

SPECIFICATIONS  LIGHTING (EXT)  SERVICE DATA  


REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected e4-1 (STP) - A-1 Always Below 1 Ω
e4-2 (TL) - A-2
e4-4 (E) - A-3

REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY RH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected g2-1 (STP) - A-1 Always Below 1 Ω
g2-2 (TL) - A-2
g2-4 (E) - A-3

HEADLIGHT DIMMER SWITCH (for LHD)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 2 (L_OFF) - 12 (EL) Light control switch off Below 1 Ω
10 (A) - 12 (EL) Light control switch AUTO position Below 1 Ω
14 (T) - 12 (EL) Light control switch TAIL position Below 1 Ω
5 (H) - 12 (EL) Light control switch HEAD position Below 1 Ω
6 (HF) - 12 (EL) Headlight dimmer switch flash position Below 1 Ω
1 (HU) - 12 (EL) Headlight dimmer switch high position Below 1 Ω
9 (TR) - 12 (EL) Turn signal switch neutral position 10 kΩ or higher
3 (TL) - 12 (EL)
9 (TR) - 12 (EL) Turn signal switch right turn position
(self cancel condition) 		Below 1 Ω
9 (TR) - 12 (EL) Turn signal switch right turn position
(cancel ratchet operation condition) 		Below 1 Ω
9 (TR) - 11 (CR)
11 (CR) - 12 (EL)
3 (TL) - 12 (EL) Turn signal switch left turn position
(self cancel condition) 		Below 1 Ω
3 (TL) - 12 (EL) Turn signal switch in left turn position
(cancel ratchet operation condition) 		Below 1 Ω
3 (TL) - 11 (CR)
11 (CR) - 12 (EL)
4 (BFG) - 12 (EL) Front fog light switch off 10 kΩ or higher
Front fog light switch on Below 1 Ω
13 (B) - 12 (EL) Rear fog light switch off 10 kΩ or higher
Rear fog light switch on Below 1 Ω

HINT:
·

The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 6.3°).

·

The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch operation is 10.5°).



HEADLIGHT DIMMER SWITCH (for RHD)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 15 (L_OFF) - 5 (EL) Light control switch off Below 1 Ω
7 (A) - 5 (EL) Light control switch AUTO position Below 1 Ω
3 (T) - 5 (EL) Light control switch TAIL position Below 1 Ω
12 (H) - 5 (EL) Light control switch HEAD position Below 1 Ω
11 (HF) - 5 (EL) Headlight dimmer switch flash position Below 1 Ω
16 (HU) - 5 (EL) Headlight dimmer switch high position Below 1 Ω
8 (TR) - 5 (EL) Turn signal switch neutral position 10 kΩ or higher
14 (TL) - 5 (EL)
8 (TR) - 5 (EL) Turn signal switch right turn position
(self cancel condition) 		Below 1 Ω
8 (TR) - 5 (EL) Turn signal switch right turn position
(cancel ratchet operation condition) 		Below 1 Ω
8 (TR) - 6 (CR)
6 (CR) - 5 (EL)
14 (TL) - 5 (EL) Turn signal switch left turn position
(self cancel condition) 		Below 1 Ω
14 (TL) - 5 (EL) Turn signal switch in left turn position
(cancel ratchet operation condition) 		Below 1 Ω
14 (TL) - 6 (CR)
6 (CR) - 5 (EL)
13 (BFG) - 5 (EL) Front fog light switch off 10 kΩ or higher
Front fog light switch on Below 1 Ω
4 (B) - 5 (EL) Rear fog light switch off 10 kΩ or higher
Rear fog light switch on Below 1 Ω

HINT:
·

The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 6.3°).

·

The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch operation is 10.5°).



SWITCH HOUSING (for LHD)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected z7-2 (L OFF) - z9-2 Always Below 1 Ω
z7-3 (T) - z9-14
z7-4 (H) - z9-5
z7-5 (A) - z9-10
z7-6 (HU) - z9-1
z7-7 (HF) - z9-6
z7-11 (BFG) - z9-4
z7-12 (B) - z9-13
z7-13 (EL) - z9-12
z7-8 (TR) - z9-9
z7-9 (TL) - z9-3
z7-10 (CR) - z9-11
z7-13 (EL) - z9-12
z7-24 (W_OFF) - z6-10
z7-25 (+S) - z6-13
z7-26 (+1) - z6-11
z7-27 (+2) - z6-12
z7-28 (MIST) - z6-14
z7-29 (C1R) - z6-7
z7-30 (+1R) - z6-6
z7-31 (WF) - z6-15
z7-32 (WR) - z6-9
z7-33 (E) - z6-5
z7-34 (VR) - z6-4

SWITCH HOUSING (for RHD)
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected z7-2 (L OFF)- z6-15 Always Below 1 Ω
z7-3 (T) - z6-3
z7-4 (H) - z6-12
z7-5 (A) - z6-7
z7-6 (HU) - z6-16
z7-7 (HF) - z6-11
z7-11 (BFG) - z6-13
z7-12 (B) - z6-4
z7-13 (EL) - z6-5
z7-8 (TR) - z6-8
z7-9 (TL) - z6-14
z7-10 (CR) - z6-6
z7-13 (EL) - z6-5
z7-24 (W_OFF) - z9-15
z7-25 (+S) - z9-12
z7-26 (+1) - z9-14
z7-27 (+2) - z9-13
z7-28 (MIST) - z9-11
z7-29 (C1R) - z9-2
z7-30 (+1R) - z9-3
z7-31 (WF) - z9-10
z7-32 (WR) - z9-16
z7-33 (E) - z9-4
z7-34 (VR) - z9-5

HAZARD WARNING SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 5 - 4 Hazard warning signal switch off 10 kΩ or higher
Hazard warning signal switch on Below 1 Ω

HEADLIGHT LEVELING SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 4 (T) - 2 (E) 0 0.8 to 1.6 V
1 2.8 to 3.5 V
2 4.7 to 5.4 V
3 6.6 to 7.3 V
4 8.5 to 9.2 V
5 10.4 to 11.2 V

AUTOMATIC HIGH BEAM MAIN SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component without harness connected 5 (B) - 2 (E) Automatic high beam main switch off 10 kΩ or higher
Automatic high beam main switch on Below 1 Ω

STOP LIGHT SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component with harness connected M2-1 (OUT) - M2-2 (GND) Brake pedal released 1.5 V or less
Brake pedal depressed 11 to 14 V
M2-3 (L) - M2-2 (GND) Brake pedal released 1.5 V or less
Brake pedal depressed 11 to 14 V
M2-4 (ACC) - M2-2 (GND) Always 11 to 14 V
M2-5 (L) - M2-2 (GND) Ignition switch on (IG), brake pedal released 7.5 to 14 V
Ignition switch on (IG), brake pedal depressed Below 1.5 V

STOP LIGHT SWITCH
Connector Condition Tester Connection Switch Condition Specified Condition
Component with harness connected 1 (L) - 2 (B) Shaft not pushed Below 1 Ω
Shaft pushed 10 kΩ or higher
3 (L) - 4 (B) Shaft not pushed 10 kΩ or higher
Shaft not pushed Below 1 Ω

AUTOMATIC LIGHT CONTROL SENSOR
Connector Condition Tester Connection Condition Specified Condition
Component with harness connected Q2-4 (CLTS) - Q2-2 (CLTE) Ignition switch on (IG), light control switch in AUTO position Correct waveform is as shown

E276298N01
2.844,1.646 3.219,1.813 0.375,0.167 10 false GND

HINT:

The communication waveform changes according to the surrounding brightness.


RELAY (DIM LH Relay)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 4 Battery voltage is not applied to terminals 1 and 2 Below 1 Ω
Battery voltage is applied to terminals 1 and 2 10 kΩ or higher
- 3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω

RELAY (DIM RH Relay)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 4 Battery voltage is not applied to terminals 1 and 2 Below 1 Ω
Battery voltage is applied to terminals 1 and 2 10 kΩ or higher
- 3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω

RELAY (FOG FR Relay)
Connector Condition Tester Connection Condition Specified Condition
- 3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage is applied to terminals 1 and 2 Below 1 Ω