Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
The procedure listed below is a representative example.
Use the same procedure for first row and second row.
79136C
1.INSPECT NO. 1 SEAT CUSHION PAD LH (OCCUPANT DETECTION SENSOR)
| *a | Component without harness connected
(No. 1 Seat Cushion Pad LH (Occupant Detection Sensor)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 3 | Seat occupied | Below 100 Ω |
| Seat not occupied | 1 MΩ or higher |
If the result is not as specified, replace the No. 1 seat cushion pad LH.