☰ Toyota HiAce☰ فهرستVehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for Power Captain Seat)
RM35X0E
_58
Vehicle Interior
_078602
SEAT BELT
_0398436
REAR SEAT INNER BELT ASSEMBLY(for Power Captain Seat)
G
SEAT BELT REAR SEAT INNER BELT ASSEMBLY(for Power Captain Seat) INSPECTION
CAUTION / NOTICE / HINT
- HINT:
- ·
Use the same procedure for RHD and LHD vehicles.
·The procedures listed below are for LHD vehicles.
·Use the same procedure for the RH and LH sides.
·The procedure listed below is for the LH side.
·The procedure listed below is a representative example.
·Use the same procedure for first row and second row.
PROCEDURE
73380D
1.INSPECT REAR SEAT INNER BELT ASSEMBLY
a.
0.104,0.115 0.417,0.271
0.313,0.156
10
false
*a
| *a | Component without harness connected
(Rear Seat Inner Belt Assembly) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 4 - 5 Seat belt unfastened Below 1 Ω Seat belt fastened 10 kΩ or higher
If the result is not as specified, replace the rear seat inner belt assembly.