DATA LIST
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter or Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Passenger Buckle / Occupant Detection Warning Switch | Front passenger seat belt buckle switch and occupant detection sensor signal | OFF or ON | OFF: Front passenger seat belt fastened
ON: Front passenger seat belt not fastened |
·
w/ Front Passenger Seat Belt Warning ·
Perform the inspection while sitting in the front passenger side seat. |
| Rear Right Seat Buckle / Occupant Detection Warning Switch | Rear seat inner belt RH buckle and occupant detection sensor signal | OFF or ON | OFF: Rear RH seat belt fastened and occupied
ON: Rear RH seat belt not fastened and occupied |
w/ Rear Seat Belt Warning |
| Rear Left Seat Buckle / Occupant Detection Warning Switch | Rear seat inner belt LH buckle and occupant detection sensor signal | OFF or ON | OFF: Rear LH seat belt fastened and occupied
ON: Rear LH seat belt not fastened and occupied |
w/ Rear Seat Belt Warning |
| Rear Center Seat Buckle / Occupant Detection Warning Switch | Rear seat inner belt (for Center) buckle and occupant detection sensor signal | OFF or ON | OFF: Rear center seat belt fastened and occupied
ON: Rear center seat belt not fastened and occupied |
w/ Rear Seat Belt Warning except Wagon |
| 3rd Right Seat Buckle / Occupant Detection Warning Switch | Rear No. 2 seat inner belt RH buckle and occupant detection sensor signal | OFF or ON | OFF: Rear No. 2 seat belt RH fastened and occupied
ON: Rear No. 2 seat belt RH not fastened and occupied |
w/ Rear No. 2 Seat Belt Warning |
| 3rd Left Seat Buckle / Occupant Detection Warning Switch | Rear No. 2 seat inner belt LH buckle and occupant detection sensor signal | OFF or ON | OFF: Rear No. 2 seat belt LH fastened and occupied
ON: Rear No. 2 seat belt LH not fastened and occupied |
w/ Rear No. 2 Seat Belt Warning |
| Driver Seatbelt Warning Buzzer Function | Enables sounding of the driver seat belt warning buzzer | OFF or ON | Customized setting displayed | - |
| Passenger Seatbelt Warning Buzzer Function | Enables sounding of the front passenger seat belt warning buzzer | OFF or ON | Customized setting displayed | w/ Front Passenger Seat Belt Warning |
| Front Center Seatbelt Warning Buzzer Function | Enables sounding of the front center seat belt warning buzzer | OFF or ON | Customized setting displayed | w/ Front Center Seat Warning |
| Rear Right Seatbelt Warning Buzzer Function | Function to sound the rear RH seat belt warning buzzer | OFF or ON | Customized setting displayed | w/ Rear Seat Belt Warning |
| Rear Left Seatbelt Warning Buzzer Function | Function to sound the rear LH seat belt warning buzzer | OFF or ON | Customized setting displayed | w/ Rear Seat Belt Warning |
| Rear Center Seatbelt Warning Buzzer Function | Function to sound the rear center seat belt warning buzzer | OFF or ON | Customized setting displayed | w/ Rear Seat Belt Warning except Wagon |
| 3rd Right Seatbelt Warning Buzzer Function | Function to sound the rear No. 2 RH seat belt warning buzzer*3 | OFF or ON | Customized setting displayed | w/ Rear No. 2 Seat Belt Warning |
| 3rd Left Seatbelt Warning Buzzer Function | Function to sound the rear No. 2 LH seat belt warning buzzer*3 | OFF or ON | Customized setting displayed | w/ Rear No. 2 Seat Belt Warning |
| 4th Right Seat Buckle / Occupant Detection Warning Switch | Rear No. 3 seat inner belt RH buckle and occupant detection sensor signal | OFF or ON | OFF: Rear No. 3 seat belt RH fastened and occupied
ON: Rear No. 3 seat belt RH not fastened and occupied |
w/ Rear No. 3 RH Seat Belt Warning |
| 4th Left Seat Buckle / Occupant Detection Warning Switch | Rear No. 3 seat inner belt LH buckle and occupant detection sensor signal | OFF or ON | OFF: Rear No. 3 seat belt LH fastened and occupied
ON: Rear No. 3 seat belt LH not fastened and occupied |
w/ Rear No. 3 LH Seat Belt Warning |
| 4th Center Seat Buckle / Occupant Detection Warning Switch | Rear No. 3 center seat inner belt buckle and occupant detection sensor signal | OFF or ON | OFF: Rear No. 3 center seat belt fastened and occupied
ON: Rear No. 3 center seat belt not fastened and occupied |
w/ Rear No. 3 Center Seat Belt Warning |
| CTR Seat Buckle / Occupant Detection Warning Switch | Front center seat belt buckle switch and occupant detection sensor signal | OFF or ON | OFF: Front center seat belt fastened
ON: Front center seat belt not fastened |
·
w/ Front Center Seat Belt Warning ·
Perform the inspection while sitting in the front center seat. |
| 4th Right Seatbelt Warning Buzzer Function | Function to sound the rear No. 3 RH seat belt warning buzzer*3 | OFF or ON | Customized setting displayed | w/ Rear No. 3 RH Seat Belt Warning |
| 4th Left Seatbelt Warning Buzzer Function | Function to sound the rear No. 3 LH seat belt warning buzzer*3 | OFF or ON | Customized setting displayed | w/ Rear No. 3 LH Seat Belt Warning |
| 4th Center Seatbelt Warning Buzzer Function | Function to sound the rear No. 3 center seat belt warning buzzer*3 | OFF or ON | Customized setting displayed | w/ Rear No. 3 Center Seat Belt Warning |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| D Seat Buckle SW | Driver seat belt buckle switch signal | OFF or ON | OFF: Driver seat belt unfastened
ON: Driver seat belt fastened |
- |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Buzzer Operation (800Hz, Vol L, W/ Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Large ·
Fading tone |
ON | - |
| Buzzer Operation (800Hz, Vol L, W/O Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Large ·
Continuous tone |
ON | - |
| Buzzer Operation (800Hz, Vol S, W/ Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Small ·
Fading tone |
ON | - |
| Buzzer Operation (800Hz, Vol S, W/O Damping) | Combination meter buzzer
·
Frequency: 800Hz ·
Volume: Small ·
Continuous tone |
ON | - |
| Driver Side Seat Belt Warning | Front seat belt warning buzzer | OFF/ON | - |