RM35X0E _58 Vehicle Interior _078336 DOOR LOCK _0379904 POWER DOOR LOCK CONTROL SYSTEM U

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  DATA LIST / ACTIVE TEST  


DATA LIST


HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body, Master Switch / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Key Unlock Warning SW Un-lock warning switch signal ON or OFF ON: Key in ignition key cylinder
OFF: No key in ignition key cylinder 		-
ACC SW Ignition switch ACC signal OFF or ON OFF: Ignition switch off
ON: Ignition switch ACC 		"ON" is also displayed for this item when the ignition switch is ON.
IG SW Ignition switch ON signal OFF or ON OFF: Ignition switch off
ON: Ignition switch ON 		"OFF" is also displayed for this item when the ignition switch is ACC.
RR Door Courtesy SW Slide door courtesy light switch assembly RH signal*1 OFF or ON OFF: Slide door RH closed
ON: Slide door RH open 		-
RL Door Courtesy SW Slide door courtesy light switch assembly LH signal*2 OFF or ON OFF: Slide door LH closed
ON: Slide door LH open 		-
Back Door Courtesy SW Back door courtesy light switch signal OFF or ON OFF: Back door closed
ON: Back door open 		-
Back Door Lock Pos SW Back door lock position switch signal OFF or ON ON: Back door unlocked
OFF: Back door locked 		-
Door Key SW-Lock Driver door key-linked switch lock signal OFF or ON OFF: Driver and front passenger*3 door key cylinder not turned to lock position
ON: Driver and front passenger*3 door key cylinder turned to lock position 		-
Door Key SW-Unlock Front passenger door key-linked switch unlock signal*3 OFF or ON OFF: Front passenger door key cylinder not turned to unlock position
ON: Front passenger door key cylinder turned to unlock position 		-
D Door Key SW-UL Driver door key-linked switch unlock signal OFF or ON OFF: Driver door key cylinder not turned to unlock position
ON: Driver door key cylinder turned to unlock position 		-
FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK LOCK: Front door RH locked
UNLOCK: Front door RH unlocked 		-
FR Door Courtesy SW Front door courtesy light switch assembly RH signal OFF or ON OFF: Front door RH closed
ON: Front door RH open 		-
FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK LOCK: Front door LH locked
UNLOCK: Front door LH unlocked 		-
FL Door Courtesy SW Front door courtesy light switch assembly LH signal OFF or ON OFF: Front door LH closed
ON: Front door LH open 		-
RR-Door Lock Pos SW Slide door RH unlock detection switch signal*1 OFF or ON OFF: Slide door RH locked
ON: Slide door RH unlocked 		-
RL-Door Lock Pos SW Slide door LH unlock detection switch signal*2 OFF or ON OFF: Slide door LH locked
ON: Slide door LH unlocked 		-

*1: w/ Slide Door RH

*2: w/ Slide Door LH

*3: w/ Front Passenger Side Door Key Cylinder


Body Electrical > Master Switch > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Door Lock Switch Status Multiplex network master switch assembly lock signal OFF or ON OFF: Lock side of multiplex network master switch assembly not pushed
ON: Lock side of multiplex network master switch assembly pushed 		-
Door Unlock Switch Status Multiplex network master switch assembly unlock signal OFF or ON OFF: Unlock side of multiplex network master switch assembly not pushed
ON: Unlock side of multiplex network master switch assembly pushed 		-


ACTIVE TEST


HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Active Test.


e.

Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Door Lock Door lock motor OFF/Unlock/Lock -
D-Door Unlock Driver door lock motor OFF/ON -
Shock Detection Unlock Operate door lock motor* UNLOCK/LOCK -

*: w/ Entry and Start System