DATA LIST
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Key Unlock Warning SW | Un-lock warning switch | ON or OFF | ON: Key inserted into ignition key cylinder
OFF: Key removed from ignition key cylinder |
- |
| ACC SW | Ignition switch | ON or OFF | ON: Ignition switch ACC
OFF: Ignition switch off |
"ON" is also displayed for this item when the ignition switch is ON. |
| IG SW | Ignition switch | ON or OFF | ON: Ignition switch ON
OFF: Ignition switch off |
"OFF" is also displayed for this item when the ignition switch is ACC. |
| RR Door Courtesy SW | Rear door courtesy light switch RH*1 | ON or OFF | ON: Slide door RH open
OFF: Slide door RH closed |
- |
| RL Door Courtesy SW | Rear door courtesy light switch LH*2 | ON or OFF | ON: Slide door LH open
OFF: Slide door LH closed |
- |
| Back Door Courtesy SW | Back door courtesy light switch | ON or OFF | ON: Back door open
OFF: Back door closed |
- |
| Back Door Lock Pos SW | Back door lock position switch status | ON or OFF | ON: Back door unlocked
OFF: Back door locked |
- |
| FR Door Lock Pos | Front door RH unlock detection switch | LOCK or UNLOCK | LOCK: Front door RH locked
UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch RH | ON or OFF | ON: Front door RH open
OFF: Front door RH closed |
- |
| FL Door Lock Pos | Front door LH unlock detection switch | LOCK or UNLOCK | LOCK: Front door LH locked
UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch LH | ON or OFF | ON: Front door LH open
OFF: Front door LH closed |
- |
| Hood Courtesy SW | Engine hood courtesy switch | ON or OFF | ON: Engine hood open
OFF: Engine hood closed |
- |
| RR-Door Lock Pos SW | Slide door RH unlock detection switch signal*1 | ON or OFF | ON: Slide door RH unlocked
OFF: Slide door RH locked |
- |
| RL-Door Lock Pos SW | Slide door LH unlock detection switch signal*2 | ON or OFF | ON: Slide door RH unlocked
OFF: Slide door RH locked |
- |
| Warning by Horn | This function is used to enable or disable the warning by horn*3 | ON or OFF | Customization status displayed | - |
*1: w/ Slide Door RH
*2: w/ Slide Door LH
*3: for the vehicles displaying the item "Warning by Horn" on the GTS
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Immobiliser / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Indicator | Security indicator | ON or OFF | - |
| Security Horn2 | Theft warning siren assembly*1 | ON or OFF | - |
| Vehicle Horn | Vehicle horn | ON or OFF | - |
| Security Horn | Security horn assembly*2 | ON or OFF | - |
*1: w/o Security Horn Assembly
*2: w/ Security Horn Assembly
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Indicator | Security indicator* | ON or OFF | - |
*: w/o Entry and Start System