RM35X0E _53 Suspension _078877 REAR SUSPENSION _0397337 REAR STABILIZER BAR G

REAR SUSPENSION  REAR STABILIZER BAR  INSPECTION  


PROCEDURE

Hide 48840A 1.INSPECT REAR STABILIZER LINK ASSEMBLY

C328536

a.

As shown in the illustration, move the ball joint stud back and forth 5 times before installing the nut.


b.

Using a torque wrench, turn the nut continuously at a rate of 2 to 3 seconds per turn and take the torque reading on the fifth turn.

Turning torque:

0.05 to 1.96 N*m (0.6 to 19.9 kgf*cm, 0.5 to 17.3 in.*lbf)



c.

Check for any cracks and grease leaks on the ball joint dust cover.