PARK ASSIST / MONITORING  REAR CROSS TRAFFIC ALERT BUZZER  REMOVAL  

1. PRECAUTION

33622 2.DISCONNECT NO. 1 SHIFT LEVER KNOB COVER (for Automatic Transmission)

33504F 3.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

58840Q 4.REMOVE SHIFTING HOLE COVER ASSEMBLY (for Manual Transmission)

35970F 5.REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Automatic Transmission)

55405B 6.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

55900 7.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

55410C 8.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

9.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

10.REMOVE DISPLAY AND NAVIGATION ASSEMBLY WITH BRACKET (w/ Navigation System)

11.REMOVE RADIO TUNER OPENING COVER WITH BRACKET (w/ Radio Receiver Opening Cover)

89747F 12.REMOVE BLIND SPOT MONITOR BUZZER

HINT:

Perform the following procedure only when replacement of a blind spot monitor buzzer is necessary.

a.

Using a clip remover, detach the clamp and remove the blind spot monitor buzzer.

HINT:

Tape the clip remover tip before use.

b.

Disconnect the connector.

0.083,0.083 0.417,0.333 0.333,0.25 12 false *A 3.417,0.083 3.75,0.333 0.333,0.25 12 false *B

*A	for LHD	*B	for RHD
	Protective Tape	-	-