DATA LIST (w/ Auto Power Retract Mirror)
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Outer Mirror Fold SW | Outer mirror switch signal | ON/OFF | ON: Outer mirror switch assembly in retract position
OFF: Outer mirror switch assembly not in retract position |
- |
| Auto Mirror SW | Outer mirror switch signal | ON/OFF | ON: Outer mirror switch assembly in auto position
OFF: Outer mirror switch assembly not in auto position |
- |
| Auto Fold Mirror | Function that changes the condition under which the outer mirrors automatically retract | ACC/Door Lock/OFF | Customized setting displayed | - |
ACTIVE TEST (w/ Auto Power Retract Mirror)
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Mirror Fold | Mirror retract operation | ON/OFF | - |
| Mirror Return | Mirror retract operation | ON/OFF | - |