CUSTOMIZE WIPER AND WASHER SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Wiper.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Auto Wiper | Function to enable AUTO wiper operation*1 | Avail | 0:Avail,1:Not Avl | Rain Sensor |
| Rear Wiper Stop in Back Door/Trunk Lid Open | Function to enable the back door open linked rear wiper suspend function*2 | Available | 0:Not Available,1:Available | Main body ECU (Multiplex network body ECU) |
| Rear Wiper Washer Function | Function to enable the rear washer linked rear wiper operation function*2 | Available | 0:Not Available,1:Available | Main body ECU (Multiplex network body ECU) |
| Auto Rear Wiper in Reverse Setting | Function to enable the R shift position linked rear wiper operation function*2, *3 | Once | 00:Not Available,10:Once,11:Continuance | Main body ECU (Multiplex network body ECU) |
*1: w/ Auto Wiper System
*2: w/ Rear Wiper
*3: except Manual Transmission