RM35X0E _56 Audio / Visual / Telematics _078377 AUDIO / VIDEO _0396432 ROOF SPEAKER(for Wagon) G

AUDIO / VIDEO  ROOF SPEAKER(for Wagon)  INSPECTION  


PROCEDURE

Hide 86160Q 1.INSPECT ROOF SPEAKER ASSEMBLY

a.

With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.


b.

Check that there is no foreign matter inside the speaker.


c.

Check that the speaker cone is not damaged.


d.

Replace and check.

OK:

Malfunction disappears.


HINT:

Switch the right and left speakers and perform a check when either the right or left roof speaker assembly is suspected to be malfunctioning.



Hide 86150A 2.INSPECT NO. 2 SPEAKER ASSEMBLY WITH BRACKET (for 12 Speakers)

a.

for Front Roof Side:

i.
E139232C01
1.917,1.281 2.531,1.219 true 0.896,1.24 1.5,1.302 true 0.125,0.115 0.438,0.313 0.313,0.198 10 false *a 2.604,1.125 2.76,1.323 0.156,0.198 10 false + 0.76,1.125 0.917,1.323 0.156,0.198 10 false -
*a Component without harness connected
(No. 2 Speaker Assembly with Bracket)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (+) - 2 (-) Always 6 Ω


If the result is not as specified, replace the No. 2 speaker assembly with bracket.



b.

for Rear Roof Side:

i.
E139232C02
1.917,1.281 2.531,1.219 true 0.896,1.24 1.5,1.302 true 0.125,0.115 0.438,0.313 0.313,0.198 10 false *a 2.604,1.125 2.76,1.323 0.156,0.198 10 false + 0.76,1.125 0.917,1.323 0.156,0.198 10 false -
*a Component without harness connected
(No. 2 Speaker Assembly with Bracket)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (+) - 2 (-) Always 6 Ω


If the result is not as specified, replace the No. 2 speaker assembly with bracket.