RM35X0E _59 Vehicle Exterior _079256 LIGHTING (EXT) _0396321 LIGHTING SYSTEM(w/ Headlight ECU) C

LIGHTING (EXT)  LIGHTING SYSTEM(w/ Headlight ECU)  B2414  Steering Position Sensor  


DESCRIPTION

The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Note
B2414 Steering Position Sensor
Detection condition:

The engine switch is on (IG)


Malfunction status:

Sensor malfunction signals are continuously received from the steering sensor


Malfunction duration:

10 seconds or more


Electronically controlled brake system HL AutoLeveling -

WIRING DIAGRAM

E370855E04
0.677,2.26 2.667,2.5 1.99,0.24 10 false : CAN Communication Line 1.333,1.583 3.167,1.875 1.833,0.292 10 false Steering Sensor 4.625,1.563 6.74,2.115 2.115,0.552 10 false Headlight ECU Sub-assembly LH

PROCEDURE

1.CLEAR DTC
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / HL AutoLeveling / Clear DTCs.


e.

Clear the DTCs.

Body Electrical > HL AutoLeveling > Clear DTCs
50002 361

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Wait 10 seconds or more.


d.

Turn the GTS on.


e.

Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.


f.

Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes
50001 361
OK:

DTC B2414 is not output.



Result:
Proceed to
OK
NG



OK

USE SIMULATION METHOD TO CHECK

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING


NG

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ VSC OFF Switch)>HOW TO PROCEED WITH TROUBLESHOOTING