☰ Toyota HiAce☰ فهرستVehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY(for Commuter, Single-Passenger Seat with 2-Point Type Seat Belt)
RM35X0E
_58
Vehicle Interior
_078602
SEAT BELT
_0390032
REAR SEAT OUTER BELT ASSEMBLY(for Commuter, Single-Passenger Seat with 2-Point Type Seat Belt)
A
SEAT BELT REAR SEAT OUTER BELT ASSEMBLY(for Commuter, Single-Passenger Seat with 2-Point Type Seat Belt) REMOVAL
CAUTION / NOTICE / HINT
- CAUTION:
- ·
Wear protective gloves. Sharp areas on the parts may injure your hands.
·There is risk of injury.
- HINT:
- ·
Use the same procedure for RHD and LHD vehicles.
·The procedure listed below is for LHD vehicles.
·The procedure listed below is a representative example.
·Use the same procedure for all rows, unless otherwise specified.
PROCEDURE
1.REMOVE REAR SEAT ASSEMBLY RH
79967W
2.REMOVE REAR NO. 1 SEAT NO. 4 LEG SIDE COVER
79967X
3.REMOVE REAR NO. 1 SEAT NO. 5 LEG SIDE COVER
72525R
4.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (w/ Seatback Board)
71833M
5.REMOVE RH SEAT REAR NO. 2 SEAT RECLINING COVER RH
73330L
6.REMOVE REAR 1 PERSON SEAT LAP TYPE BELT ASSEMBLY
a.
Remove the bolt and rear 1 person seat lap type belt assembly.