RM35X0E
_58
Vehicle Interior
_079316
HEATING / AIR CONDITIONING
_0384877
REAR HEATER UNIT
G
HEATING / AIR CONDITIONING REAR HEATER UNIT INSPECTION
PROCEDURE
87104R
1.INSPECT REAR HEATER BLOWER MOTOR SUB-ASSEMBLY
a.
0.094,0.094 0.406,0.292
0.313,0.198
10
false
*a
1.677,1.927 1.896,2.115
0.219,0.188
10
true
*b
| *a | Component without harness connected
(Rear Heater Blower Motor Sub-assembly) |
| *b | Direction of Rotation |
Check the motor operation.
i.
Apply the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 1
Battery negative (-) → 2Rear heater blower motor sub-assembly operates smoothly
If the result is not as specified, replace the rear heater blower motor sub-assembly.
ii.
Measure the current according to the value (s) in the table below.
- Standard Current:
Measurement Condition Condition Specified Condition 1 - 2 Rear heater blower motor sub-assembly operate Below 1.8 A
If the result is not as specified, replace the rear heater blower motor sub-assembly.