SEAT BELT REAR SEAT OUTER BELT ASSEMBLY(for Commuter, 2-Passenger Seat with 2-Point Type Seat Belt without Headrest) REMOVAL
CAUTION / NOTICE / HINT
- CAUTION:
- ·
Wear protective gloves. Sharp areas on the parts may injure your hands.
·There is risk of injury.
- HINT:
- ·
Use the same procedure for RHD and LHD vehicles.
·The procedure listed below is for LHD vehicles.
·Use the same procedure for the RH and LH sides.
·The following procedure is for the LH side.
·The procedure listed below is a representative example.
·Use the same procedure for all rows, unless otherwise specified.
PROCEDURE
1.REMOVE REAR SEAT ASSEMBLY LH
79J67E
2.REMOVE REAR NO. 3 SEAT NO. 3 LEG SIDE COVER
|
Remove in this Direction |
Detach the hook and remove the rear No. 3 seat No. 3 leg side cover as shown in the illustration.
79J67C
3.REMOVE REAR NO. 3 SEAT NO. 1 LEG SIDE COVER
79J67D
4.REMOVE REAR NO. 3 SEAT NO. 2 LEG SIDE COVER
71834Q
5.REMOVE LH SEAT REAR NO. 3 SEAT RECLINING COVER LH
71833Q
6.REMOVE LH SEAT REAR NO. 3 SEAT RECLINING COVER RH
- HINT:
-
Use the same procedure described for the LH side.
73380N
7.REMOVE REAR 2 PERSONS SEAT BELT ASSEMBLY LH
73380M
8.REMOVE REAR 2 PERSONS SEAT BELT ASSEMBLY RH
- HINT:
-
Use the same procedure described for the LH side.
9.REMOVE SEAT CUSHION COVER WITH PAD
73460C
10.REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY
Remove the bolt and rear center seat inner belt assembly.