RM35X0E _58 Vehicle Interior _078601 SEAT _0389891 OCCUPANT DETECTION SENSOR(for Rear Seat) G

SEAT  OCCUPANT DETECTION SENSOR(for Rear Seat)  INSPECTION  


PROCEDURE

Hide 79135D 1.INSPECT NO. 1 SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

a.

for LH:

i.
B378697C28
0.177,0.156 0.49,0.313 0.313,0.156 10 false *a
*a Component without harness connected
(No. 1 Seat Cushion Pad (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the No. 1 seat cushion pad (occupant detection sensor).

1 - 3 LH seat occupied Below 100 Ω
LH seat not occupied 1 MΩ or higher




b.

for CENTER:

i.
B378697C28
0.177,0.156 0.49,0.313 0.313,0.156 10 false *a
*a Component without harness connected
(No. 1 Seat Cushion Pad (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the No. 1 seat cushion pad (occupant detection sensor).

1 - 3 Center seat occupied Below 100 Ω
Center seat not occupied 1 MΩ or higher




c.

for RH:

i.
B378697C28
0.177,0.156 0.49,0.313 0.313,0.156 10 false *a
*a Component without harness connected
(No. 1 Seat Cushion Pad (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the No. 1 seat cushion pad (occupant detection sensor).

1 - 3 RH seat occupied Below 100 Ω
RH seat not occupied 1 MΩ or higher