☰ Toyota HiAce☰ فهرستVehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR(for Sliding Bench Seat Type)
RM35X0E
_58
Vehicle Interior
_078602
SEAT BELT
_0389113
OCCUPANT DETECTION SENSOR(for Sliding Bench Seat Type)
G
SEAT BELT OCCUPANT DETECTION SENSOR(for Sliding Bench Seat Type) INSPECTION
PROCEDURE
71511A
1.INSPECT FRONT SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR)
a.
for Side:
i.
0.177,0.156 0.49,0.313
0.313,0.156
10
false
*a
| *a | Component without harness connected
(Front Seat Cushion Pad RH (Occupant Detection Sensor)) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition If the result is not as specified, replace the front seat cushion pad RH (occupant detection sensor).
1 - 3 Front passenger side seat occupied Below 100 Ω Front passenger side seat not occupied 1 MΩ or higher
b.
for Center:
i.
0.177,0.156 0.49,0.313
0.313,0.156
10
false
*a
| *a | Component without harness connected
(Front Seat Cushion Pad RH (Occupant Detection Sensor)) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition If the result is not as specified, replace the front seat cushion pad RH (occupant detection sensor).
1 - 3 Front passenger center seat occupied Below 100 Ω Front passenger center seat not occupied 1 MΩ or higher