RM35X0E _58 Vehicle Interior _078336 DOOR LOCK _0379905 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)  DATA LIST / ACTIVE TEST  


DATA LIST


HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Key Unlock Warning SW Un-lock warning switch OFF or ON OFF: No key in ignition key cylinder
ON: Key in ignition key cylinder
-
ACC SW Ignition switch ACC signal OFF or ON OFF: Ignition switch off
ON: Ignition switch ACC
"ON" is also displayed for this item when the ignition switch is ON.
IG SW Ignition switch ON signal OFF or ON OFF: Ignition switch off
ON: Ignition switch ON
"OFF" is also displayed for this item when the ignition switch is ACC.
RR Door Courtesy SW Slide door courtesy light switch assembly RH signal*1 OFF or ON OFF: Slide door RH closed
ON: Slide door RH open
-
RL Door Courtesy SW Slide door courtesy light switch assembly LH signal*2 OFF or ON OFF: Slide door LH closed
ON: Slide door LH open
-
Back Door Courtesy SW Back door courtesy light switch signal OFF or ON OFF: Back door closed
ON: Back door open
-
Back Door Lock Pos SW Back door lock position switch signal OFF or ON ON: Back door unlocked
OFF: Back door locked
-
FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK LOCK: Front door RH locked
UNLOCK: Front door RH unlocked
-
FR Door Courtesy SW Front door courtesy light switch assembly RH signal OFF or ON OFF: Front door RH closed
ON: Front door RH open
-
FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK LOCK: Front door LH locked
UNLOCK: Front door LH unlocked
-
FL Door Courtesy SW Front door courtesy light switch assembly LH signal OFF or ON OFF: Front door LH closed
ON: Front door LH open
-
RR-Door Lock Pos SW Slide door RH unlock detection switch signal*1 OFF or ON OFF: Slide door RH locked
ON: Slide door RH unlocked
-
RL-Door Lock Pos SW Slide door LH unlock detection switch signal*2 OFF or ON OFF: Slide door LH locked
ON: Slide door LH unlocked
-
Wireless Control Wireless door lock control function OFF or ON Customize setting displayed -
Hazard Answer Back Hazard light answer-back of wireless function OFF or ON Customize setting displayed -
Open Door Warning Open door warning OFF or ON Customize setting displayed -
Auto Lock Time Automatic lock time 30 s, 60 s or 120 s Customize setting displayed -
Wireless Buzzer Resp Buzzer answer-back of wireless*3 OFF or ON Customize setting displayed -
Wireless Buzzer Vol Wireless door lock buzzer volume*3 Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Customize setting displayed -

*1: w/ Slide Door RH

*2: w/ Slide Door LH

*3: w/ Wireless Door Lock Buzzer Answer-back Function




ACTIVE TEST


HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Active Test.


e.

Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Door Lock Door lock motor OFF/Unlock/Lock -
D-Door Unlock Driver door lock motor OFF/ON -
Wireless Buzzer Wireless door lock buzzer OFF/ON -