RM35X0E _58 Vehicle Interior _078336 DOOR LOCK _0387725 FRONT DOOR LOCK G

DOOR LOCK FRONT DOOR LOCK INSPECTION

PROCEDURE

Hide Display 69040A 1.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

0.906,3.521 1.24,3.521 true 2.167,3.542 2.5,3.542 true 1.833,3.813 2.031,4.24 2.031,4.24 2.229,4.24 true 1.583,3.802 1.469,4.229 1.469,4.229 1.333,4.229 true 2.156,2.063 2.469,2.219 0.313,0.156 10 false *a 1.583,2.479 1.896,2.635 0.313,0.156 10 false *b 0.906,2.802 1.219,2.958 0.313,0.156 10 false *c 0.792,3.438 0.948,3.635 0.156,0.198 10 false L 2.563,3.469 2.823,3.667 0.26,0.198 10 false UL 0.948,4.156 1.51,4.365 0.563,0.208 10 false LSSR 2.271,4.167 2.427,4.365 0.156,0.198 10 false E

*a	Unlock
*b	Lock
*c	Component without harness connected (Front Door Lock with Motor Assembly LH)

Check the operation of the door lock motor.

Apply battery voltage and check the operation of the door lock motor.

OK:

Battery Connection	Result
Battery positive (+) → Terminal 4 (L) Battery negative (-) → Terminal 1 (UL)	Locked
Battery positive (+) → Terminal 1 (UL) Battery negative (-) → Terminal 4 (L)	Unlocked

If the result is not as specified, replace the front door lock with motor assembly LH.

Check the operation of the unlock detection switch.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
7 (E) - 8 (LSSR)	Locked	10 kΩ or higher
7 (E) - 8 (LSSR)	Unlocked	Below 1 Ω

If the result is not as specified, replace the front door lock with motor assembly LH.

0.906,3.729 1.219,3.729 true 1.448,4.104 1.448,3.802 true 2.01,4.229 1.865,4.229 1.865,4.229 1.813,3.802 true 2.938,1.385 3.25,1.583 0.313,0.198 10 false *a 3.135,0.854 3.385,1.094 0.25,0.24 10 false *b 2.938,0.396 3.25,0.594 0.313,0.198 10 false *c 0.719,2.958 1.031,3.156 0.313,0.198 10 false *d 0.719,3.667 1.031,3.865 0.313,0.198 10 false UL 1.406,4.177 1.719,4.375 0.313,0.198 10 false L 2.063,4.167 2.375,4.365 0.313,0.198 10 false E

*a	Unlock
*b	Neutral
*c	Lock
*d	Component without harness connected (Front Door Lock with Motor Assembly LH)

Check the operation of the door key lock and unlock switch (w/ Lock Cylinder).

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
9 (L) - 7 (E)	Lock	Below 1 Ω
9 (L) - 7 (E) 10 (UL) - 7 (E)	Neutral	10 kΩ or higher
10 (UL) - 7 (E)	Unlock	Below 1 Ω

If the result is not as specified, replace the front door lock with motor assembly LH.

Hide Display 69030A 2.INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH

0.927,3.531 1.25,3.531 true 2.156,3.542 2.479,3.542 true 1.833,3.813 1.958,4.208 1.958,4.208 2.104,4.208 true 1.594,3.813 1.49,4.208 1.49,4.208 1.302,4.208 true 1.115,2.083 1.427,2.24 0.313,0.156 10 false *a 1.729,2.5 2.042,2.656 0.313,0.156 10 false *b 0.854,2.802 1.167,2.958 0.313,0.156 10 false *c 0.792,3.458 0.948,3.656 0.156,0.198 10 false L 2.552,3.469 2.802,3.667 0.25,0.198 10 false UL 2.167,4.125 2.677,4.333 0.51,0.208 10 false LSSR 1.177,4.135 1.333,4.333 0.156,0.198 10 false E

*a	Unlock
*b	Lock
*c	Component without harness connected (Front Door Lock with Motor Assembly RH)

Check the operation of the door lock motor.

Apply battery voltage and check the operation of the door lock motor.

OK:

Battery Connection	Specified Condition
Battery positive (+) → Terminal 4 (L) Battery negative (-) → Terminal 1 (UL)	Locked
Battery positive (+) → Terminal 1 (UL) Battery negative (-) → Terminal 4 (L)	Unlocked

If the result is not as specified, replace the front door lock with motor assembly RH.

Check the operation of the unlock detection switch.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
7 (LSSR) - 8 (E)	Locked	10 kΩ or higher
7 (LSSR) - 8 (E)	Unlocked	Below 1 Ω

If the result is not as specified, replace the front door lock with motor assembly RH.

1.969,3.813 2.156,4.219 true 1.604,3.792 1.49,4.198 true 2.177,3.76 2.552,3.76 true 0.604,0.531 0.917,0.729 0.313,0.198 10 false *a 0.406,0.958 0.719,1.156 0.313,0.198 10 false *b 0.635,1.406 0.948,1.604 0.313,0.198 10 false *c 0.792,2.865 1.104,3.063 0.313,0.198 10 false *d 2.604,3.646 2.917,3.844 0.313,0.198 10 false UL 2.146,4.26 2.302,4.458 0.156,0.198 10 false L 1.417,4.25 1.573,4.448 0.156,0.198 10 false E

*a	Lock
*b	Neutral
*c	Unlock
*d	Component without harness connected (Front Door Lock with Motor Assembly RH)

Check the operation of the door key lock and unlock switch (w/ Lock Cylinder).

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
6 (L) - 8 (E)	Lock	Below 1 Ω
6 (L) - 8 (E) 5 (UL) - 8 (E)	Neutral	10 kΩ or higher
5 (UL) - 8 (E)	Unlock	Below 1 Ω

If the result is not as specified, replace the front door lock with motor assembly RH.