RM35X0E _56 Audio / Visual / Telematics _079315 PARK ASSIST / MONITORING _0385761 TOYOTA PARKING ASSIST-SENSOR SYSTEM W

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM


a.

Customizing with the GTS.

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the TOYOTA parking assist-sensor system on.

HINT:

If the clearance sonar OFF indicator in the combination meter assembly is illuminated, press the back sonar or clearance sonar switch assembly to turn the clearance sonar OFF indicator off.



iv.

Turn the GTS on.


v.

Enter the following menus: Customize Setting.


vi.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Rr Sensor Onset Range Sets the detection operation range for the rear center sensors. Wide 0:Narrow,1:Wide Clearance warning ECU assembly
Fr & Rr Buzzer Volume Changes the buzzer volume setting. M 01:L,10:M,11:H Clearance warning ECU assembly
Clearance Sonar Auto Mute Function Sets the availability of the auto mute function. OFF 0:ON,1:OFF Clearance warning ECU assembly
50006 7
Sensor
Tester Display Description Default Setting ECU
Sensor Condition N Ignition switch ON, makes the front sensors available when the shift position is in N. Avail 0:Not Avail,1:Avail Clearance warning ECU assembly
Reverse Range Front Sensor Changes the operation setting for the vehicle front sensors when the shift position is in R F 0:F,1:F Stop Clearance warning ECU assembly
Non P/R Range Rear Sensor Ignition switch ON, changes the operation setting for the vehicle rear sensors when the shift position is not in P or R. R Stop 00:R,01:Rcrn,10:R Stop Clearance warning ECU assembly
50006 13
Display
Tester Display Description Default Setting ECU
Display Mode The display mode setting (when the TOYOTA parking assist-sensor system is normal). All 01:All,11:Undisp Clearance warning ECU assembly
50006 14


b.

Customizing with multi-information display (for TFT display)

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Turn the ignition switch to ON.


ii.

Turn the TOYOTA parking assist-sensor system on.

HINT:

If the clearance sonar OFF indicator in the combination meter assembly is illuminated, press the back sonar or clearance sonar switch assembly to turn the clearance sonar OFF indicator off.



iii.

Enter the following menus: Parking Assist.

HINT:

Screen switches when steering pad switch is pressed and held.



iv.

Select the setting by referring to the table below.

Display Description Default Setting ECU
Volume Sets the buzzer alert volume. 2 1, 2, or 3 Clearance warning ECU assembly