These DTCs are stored if there is a malfunction in the CAN communication system connected to the television camera assembly.
If CAN communication system DTCs are stored, they may also be stored in other systems.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | Lost Communication with ECM | CAN communication system |
| U0126 | Lost Communication With Steering Angle Sensor Module | Lost communication with steering sensor | CAN communication system |
| U0140 | Lost Communication with Body Control Module | Lost communication with main body ECU (multiplex network body ECU) | CAN communication system |
| U0163 | Lost Communication with Navigation Control Module | Lost communication with radio receiver assembly | CAN communication system |
| U0233 | Lost Communication with Blind Spot Monitor Master Module | Lost communication with blind spot monitor sensor LH | CAN communication system |
| U1110 | Lost Communication with Clearance Sonar Module | Lost communication with clearance warning ECU assembly | CAN communication system |
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
If CAN communication system DTCs are stored, they may also be stored in other systems.
If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even if the DTCs were not output when rechecking for DTCs.
| Result | Proceed to |
|---|---|
| DTC U0100, U0126, U0140, U0163, U0233 and U1110 are not output. | A |
| DTC U0100, U0126, U0140, U0163, U0233 and U1110 are output. | B |
A
B