RM35X0E _59 Vehicle Exterior _078503 DOOR / HATCH _0385655 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.

Remove any non-drying sealer on the body with non-residue solvent.


b.

Align the joint of a new back door weatherstrip with the back door lock striker and temporarily install the back door weatherstrip.

B538458C01
0.51,0.563 1.01,0.75 true 6.198,0.792 6.635,0.563 true 3.583,4.167 3.792,4.385 true 0.333,0.469 0.646,0.625 0.313,0.156 10 false *a 3.854,4.333 4.052,4.521 0.198,0.188 10 true *b 6.698,0.469 7.01,0.625 0.313,0.156 10 false *a
*a Matchmarks *b Joint
V100135

Flange Position - -


NOTICE:

When installing, make sure that non-drying sealer does not adhere to the body and back door.



c.

Align the match marks on the back door weatherstrip with the flanges on the vehicle body indicated by the arrows, and install the back door weatherstrip.

NOTICE:

Always align the matchmark when installing the part. If the matchmark position is out of place, coolant leaks may occur.


HINT:

To easily install the weatherstrip, first install the area with the matchmark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.