RM35X0E _59 Vehicle Exterior _079320 WIPER / WASHER _0385302 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Make sure that fingers or articles of clothing do not get caught in moving parts when performing this test.


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.
B538602C01
2.021,0.969 2.583,0.969 true 1.844,1.375 1.844,1.719 true 1.438,1.313 0.823,1.313 true 0.667,1.25 0.979,1.479 0.313,0.229 10 false E 2.677,0.885 2.906,1.115 0.229,0.229 10 false +1 1.771,1.75 2.115,1.958 0.344,0.208 10 false +2 0.125,0.094 0.438,0.292 0.313,0.198 10 false *a
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 1 (+1)
Battery negative (-) → Terminal 5 (E) 		Motor operates at low speed


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 4 (+2)
Battery negative (-) → Terminal 5 (E) 		Motor operates at high speed


If the result is not as specified, replace the windshield wiper motor assembly.



Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.
B538602C02
1.063,1.771 1.469,1.354 true 1.896,1.344 2.323,1.75 true 1.302,0.906 0.885,0.656 true 0.177,0.063 0.49,0.26 0.313,0.198 10 false *a 0.906,1.813 1.219,2.01 0.313,0.198 10 false +1 2.375,1.729 2.604,1.938 0.229,0.208 10 false E 0.625,0.552 0.865,0.74 0.24,0.188 10 false +2
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 5 (+1)
Battery negative (-) → Terminal 4 (E) 		Motor operates at low speed


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 3 (+2)
Battery negative (-) → Terminal 4 (E) 		Motor operates at high speed


If the result is not as specified, replace the windshield wiper motor assembly.